Ntinye ugboro ole
- Ọdụ ụgbọ okporo ígwè
- Ihe Mgbochi Nchekwa Ndị Kewapụrụ Iche
- Ndị Na-egbochi Mgbaàmà
- Ngwaọrụ Nchedo Elu
- Nchekwa Relays
- Modulu I/O nke nwere ọgụgụ isi dịpụrụ adịpụ
- Ọnụ Ụzọ Amamihe
- Ndị na-ebufe ihe nlele anya nke ụlọ ọrụ mmepụta ihe
- Ndị Nyocha Dew Point Ntanetị
- Modulu Nnweta Data
- Ihe Ntụgharị data HART
PHD-22TP-1313 /PHD-22TP-2323
Nchịkọta
A na-etinye akara ugboro ugboro n'ime ihe mgbochi nchekwa dịpụrụ adịpụ, nke nwere ike ghọta nnyefe 1: 1 nke akara ugboro ugboro nke ngwa ahụ n'ime ihe dị ize ndụ ebe ahụ gaa ebe nchekwa, ma nye ike dịpụrụ adịpụ ọkọnọ (12V ma ọ bụ 24V) maka ngwa ọrụ dị n'ime ihe dị ize ndụ mpaghara.
Ngwaahịa a chọrọ ike eletrik nke onwe ya, yana ike eletrik, ntinye na mmepụta dị iche n'etiti ibe ha.
| Ntinye n'ime mpaghara siri ike | |
| Mgbaàmà ntinye | Ugboro ≤ 100kHz, oke ≤ 12V, okirikiri ọrụ ≥ 20%, ọkwa dị elu ≥ 4V, ọkwa dị ala ≤ 1V (PHD-22TP-1313) Ugboro ≤ 100kHz, oke ≤ 24V, okirikiri ọrụ ≥ 20%, ọkwa dị elu ≥ 4V, ọkwa dị ala ≤ 1V (PHD-22TP-2323) |
| Voltaji nkesa | Voltaji sekit mepere emepe ≤ 13V, voltaji nkesa ≥ 8.5V mgbe etinyere ya na 25mA (PHD-22TP-1313) |
| Voltaji sekit mepere emepe ≤ 25V, voltaji nkesa ≥ 16V mgbe etinyere ya na 25mA (PHD-22TP-2323) | |
| Mmepụta akụkụ nchekwa: | |
| Mgbaàmà mmepụta | Ugboro 1: 1 mmepụta |
| Oke mgbaàmà | Ọkwa dị ala nke mgbaàmà ≤ 0.5V |
| Ọkwa dị elu nke mgbaàmà ≥ 10V (PHD-22TP-1313) | |
| Ọkwa dị elu nke mgbaàmà ≥ 20V (PHD-22TP-2323) | |
| Ọsọ draịva | ≤ 15mA, nguzogide ibu ≥ 1kΩ |
| Voltaji ọkọnọ | 20-35VDC |
| Oriri ike | Mgbe ejiri 24VDC rụọ ọrụ ma mpụta ya na ọkwa 12V |
| ≤ 80mA (PHD-22TP-1313) | |
| ≤ 100mA (PHD-22TP-2323) | |
| Ihe ngosi LED | Akwụkwọ ndụ akwụkwọ ndụ: Ihe ngosi ike |
| Oge ịnata na izipu oge mgbanwe | ≥20ms |
| Paramita okpomọkụ | Okpomọkụ ọrụ: -20℃~+60℃ |
| okpomọkụ nchekwa: -40℃~+80℃ | |
| Iru mmiri dị nso | 10% ~ 95% RH enweghị mmiri ozuzo |
| Ike Dielectric | N'etiti akụkụ nchekwa dị n'ime ahụ na akụkụ nchekwa na-abụghị nke dị n'ime ahụ (≥ 3000VAC/min); |
| n'etiti ọkọnọ ike na ọdụ na-anaghị echekwa ihe (≥ 1500VAC/min) | |
| Mgbochi mkpuchi | ≥100MΩ (n'etiti ntinye/mmepụta/ọkụ) |
| Ndakọrịta elektrọnik | Dịka IEC 61326-1(GB/T 18268) si kwuo, IEC 61326-3-1 |
| MTBF | 100000h |
| Ihe achọrọ maka waya | Nkebi obe ≥ 0.5mm²; Ike mkpuchi ≥ 500V |
| Ngwa ubi dị mkpa | Ngwa nha ugboro ole |
| Ebe nrụnye | E tinyere ya n'ebe nchekwa, enwere ike ijikọ ya na ngwaọrụ nchekwa dị n'ime ya n'ebe dị ize ndụ ruo Mpaghara 0, IIC, Mpaghara 20, na IIIC. |
| Asambodo nchekwa | |
| Akara ihe akaebe mgbawa | [Ex ia Ga]lIC [Ex ia Da]lllC |
| Ọkọlọtọ na-egosi mgbawa | GB/T3836.1-2021 GB/T3836.4-2021 |
| PHD-22TP-1313 | |
| Ọdụ ụgbọ okporo ígwè 1-3, 4-6 | Um:250V AC/DC Uo=14.7V DC Io=207mA |
| Po=0.76W Co=0.5μF Lo=0.56mH | |
| Ọdụ ụgbọ okporo ígwè 2-3,5-6 | Um:250V AC/DC Uo=8V DC Io=2.5mA |
| Po=5mW Co=5.9µF Lo=100mH | |
| PHD-22TP-2323 | |
| Ọdụ ụgbọ okporo ígwè 1-3, 4-6 | Um:250V AC/DC Uo=28V DC Io=93mA |
| Po=0.65W Co=0.05μF Lo=2.4mH | |
| Ọdụ 2-3,5-6 | Um:250V AC/DC Uo=8V DC Io=2.5mA |
| Po=5mW Co=5.9µF Lo=100mH | |
| Ahụ asambodo | CQST (Ụlọ Ọrụ Nlekọta na Nnwale nke Mba China maka Ngwaahịa Eletriki Echekwara Mgbawa) |
phd-22tp-1313-phd-22tp-2323
