- Ibhodi yeTheminali
- Iinqabo zokuphepha ezihlukanisiweko
- Iinsetjenziswa ezihlukanisako zesiginali
- Iinsetjenziswa zokuvikela ama-Surge
- Iinsetjenziswa zokuphepha
- Amamojula we-I/O ahlakaniphileko ahlukileko
- Amasango ahlakaniphileko
- Iinsetjenziswa ze-Optical Data yezebubulo
- Iinhlaziyi ze-Inthanethi ze-Dew Point
- Amamojula wokuthola idatha
- Umtjhugululi wedatha we-HART
PHG-11TF-27+
Ukuhlolisisa
I-isolator yesiginali yokukhipha iswitjhi yokuvikela ukugandeleleka itjhugulula isiginali yokufaka yokuthintana kweswitjhi nofana iswitjhi yokutjhidela ibe yi-relay output ngokusebenzisa i-isolation.
Ukutholwa kwephutha lelayini kukhishwa nge-relay ehlukileko begodu kutjengiswa lilanga le-LED phezulu kwemojuli. Iswitjhi yemodyuli isetjenziselwa ukukhetha isigaba sesiteshi nokuthi umsebenzi wokuthola iphutha lomlayini uyatlhogeka na.
Umkhiqizo lo udinga ukunikelwa amandla ngokuzijamela, begodu ukunikelwa kwamandla, ukungena nokukhipha amatheminali ahlukaniswe.
Iinqophiso
| Faka | |
| Isiginali yokufaka | Tjhugulula oxhumana nabo/ukutjhidela |
| Ivoltheji yokuphakela yesensa | Mayelana nama-8V |
| Izinga lokutjhugulula | |
| Iimfanelo zokufaka/zokukhipha: | |
| Ukufaka kwamanje okusesayithini | >2.1mA, okuphumako kuvaliwe, okutjengisa bona kuvuliwe; Lokha naku |
| Okukhiphako kuvamise ukuba "Vula"/"Vala" | Lokha iswitjhi yokudayela i-K1 isehlangothini elithi "VULWE", umphumela wokudlulisela uthi "Uvuliwe ngokujayelekileko". |
| Ukulawula ukutjhugulula kokuthintana | Lokha iswitjhi yokudayela i-K1 iseceleni "OFF", umphumela wokudlulisela uthi "Ngokuvamileko uvaliwe". Lokha iswitjhi yokudayela i-K2 isehlangothini elithi "ON", isekhethi ikhetha ukutjengisa umsebenzi we-alamu ye-LFD yokukhanya okubomvu. |
| Umphumela | |
| Isiginali yokuphuma | Ukudlulisa nokudlulisa i-alamu (ngokuzikhethela) |
| Umthamo wokutjhayela | 250VAC/2A,30VDC/2A lokha nayibekwa ngaphasi kwemithwalo ejamelanako |
| Isikhathi sokuphendula | 20ms |
| Iimfanelo zokuvikela ukutjhinga: | |
| I-Nominal discharge current ln(8/20μs) | 5kA |
| Izinga lokuvikelwa kwevoltheji Phezulu (8/20μs): | 60V(umugqa ukuya emgqeni) |
| Izinga lokuvikelwa kwevoltheji Phezulu (8/20μs): | 600V(ilayini ukuya phasi) |
| Ngokuya ngamazinga | GB/T18802.21-2016(okulingana ne-1EC61643-21:2012) |
| Amapharamitha asisekelo | |
| Ivoltheji yokuphakela | 20~35VDC |
| Ukusetjenziswa kwamandla | |
| Isitjengiso se-LED | Okuluhlaza: Inkomba yamandla Ophuzi: I-output relay isesimeni esijayelekileko sokusebenza Obomvu: Isitjengiso se-LFD, i-alamu yephutha lelayini |
| Amapharamitha womtjhiso | Izinga lokutjhisa lokusebenza: -20°C ~ +60°C, Izinga lokutjhisa lokugcina: -40°C ~ +80°C |
| Umswakama ohlobene | 10%~95% RH akukho ukutjhisa |
| Amandla wokuvikela | ≥2000VAC/min (phakathi kokufaka/ukukhipha/ukuphakelwa kwamandla) |
| Ukujamelana nokuvikela | 100MΩ(500V DC) (phakathi kokufaka/ukuphuma/ukuphakelwa kwamandla) |
| Ukukhambisana kwe-elekthromagnethi | GB/T 18268 (IEC 61326-1) |
| MTBF | 80000h |
| Iimfuneko zeentambo | Isigaba esiphambanweni ≥ 0.5mm2; Amandla wokuvikela ≥ 500V |
| Iinsetjenziswa ezisebenzako | Iinsetjenziswa zesimini ezifana nama-dry contacts nofana i-NAMUR yohlobo lokutjhidelana kweswitshi ehambisana nezinga le-DIN19234 |
Ubukhulu
Iintambo zokuhlanganisa
Tjheja:
1. Ukuphakelwa kwamandla wesitimela samandla kungumsebenzi ongakhetha kiwo. Abasebenzisi kufuze batjho indlela yokuphakelwa kwamandla lokha naba-oda. Sibawa uqale ukunamathiselwa ekhasini 89.
Ukutholwa kwephutha lelayini
Abasebenzisi bangakhetha ihlangothi elithi "VULA" leswitshi phezulu kwemojuli ukuvumela umsebenzi wokuthola amaphutha begodu batjengise i-alamu ngokukhanya okubomvu kwe-LED. Umtjhini wokufakwa endaweni>7mA, i-alamu yesekhethi emfitjhani (SC); Umtjhini wokufaka wendawo