I-FDI
- Ibhodi yeTheminali
- Iinqabo zokuphepha ezihlukanisiweko
- Iinsetjenziswa ezihlukanisako zesiginali
- Iinsetjenziswa zokuvikela ama-Surge
- Iinsetjenziswa zokuphepha
- Amamojula we-I/O ahlakaniphileko ahlukileko
- Amasango ahlakaniphileko
- Iinsetjenziswa ze-Optical Data yezebubulo
- Iinhlaziyi ze-Inthanethi ze-Dew Point
- Amamojula wokuthola idatha
- Umtjhugululi wedatha we-HART
PHD-11TN-11 / PHD-22TN-1111
Ukuhlolisisa
Iinqabo zokuphepha ezihlukanisiweko ezineensetjenziswa zokuthola amalangabi nentuthu zifaka amatshwayo, anganikela amandla wokuhlukanisa iinsetjenziswa zokuthola amalangabi eendaweni eziyingozi. Umtjhini wokuthola ilangabi ukhiqiza amatshwayo we-0-40mA avela endaweni eyingozi bese uwadlulisela endaweni ephephileko, udlala indima ye-alamu yentuthu. Umkhiqizo lo wamukela ukuphakelwa kwamandla we-loop begodu ulungele amahlelo we-DCS/PLC anophakelwa kwamandla we-loop.
Umkhiqizo lo awutlhogi ukuphakelwa kwamandla okuzijameleko, begodu amatheminali wokufaka nokukhipha ahlukaniswe.
| Ukufaka endaweni eyingozi | |
| Isiginali yokufaka | 0~40mA |
| Ivoltheji yokusabalalisa | Uo≥Ui-(280+RL)I-6,Ui≤24V Uo≥18-(280+RL)l,Ui>24V |
| Isekhethi emfitjhani yamanje | ≤65mA (lokha nayinikelwa amandla nge-24V) |
| Umphumela wehlangothi lokuphepha: | |
| Isiginali yokuphuma | 0~40mA |
| Isiginali yamandla | 20-35VDC |
| Isitjengiso se-LED | Okuluhlaza: isitjengiso samandla |
| Ukunemba kokudlulisa | |
| Isikhathi sokuphendula | Ukufikelela ku-90% wenani lokugcina ngaphakathi kwe-2ms |
| Ukutjhuguluka kwamazinga womtjhiso | 0.01%FS/°C |
| Amapharamitha womtjhiso | Izinga lokutjhisa lokusebenza: -20°C~+60°C |
| izinga lokutjhisa lokugcina:-40°C~+80°C | |
| Umswakama ohlobene | 10%~95% RH akukho ukutjhisa |
| Amandla we-dielectric | Phakathi kwehlangothi eliphephileko nelingaphephileko (≥ 3000VAC/min); |
| hlangana nokuphakelwa kwamandla netheminali engaphephiko (≥ 1500VAC/min) | |
| Ukujamelana nokuvikela | ≥100MΩ (phakathi kokufaka/ukukhipha/ukuphakelwa kwamandla) |
| Ukukhambisana kwe-elekthromagnethi | Ngokuya nge-IEC 61326-1(GB/T 18268), i-IEC 61326-3-1 |
| MTBF | 100000h |
| Iimfuneko zeentambo | Isigaba esiphambanweni ≥ 0.5mm2; Amandla wokuvikela ≥ 500V |
| Iinsetjenziswa ezisebenzako | Isitholi selangabi nentuthu |
| Indawo yokufaka | Ifakwe endaweni ephephileko, ingahlanganiswa namathulusi wokuphepha wangaphakathi eendaweni eziyingozi ukuya ku-Zone 0, IIC, Zone 20, kanye ne-IIIC |
| Isitifiketi esiphephileko | |
| Iphawu lokuvikela ukuqhuma | [Ex ia Ga]lIC [Ex ia Da]lllC |
| Izinga elivikela ukuqhuma | GB/T3836.1-2021 GB/T3836.4-2021 |
| Amatheminali5-6, 2-3 | Um: 250V AC/DC Uo=25.2V DC lo=93mA |
| Po=586mW Co=0.083μF Lo=4.2mH | |
| Umzimba wesitifiketi | I-CQST (i-China National Quality Supervision and Test Center of Explosion Protected Electrical Products) |
Qaphela: I-PHD-11TN-11 ayifaki iingcenye zokufaka 2 nokukhipha 2
PHD-11TC-33A-23
