- Ibhodi yeTheminali
- Iinqabo zokuphepha ezihlukanisiweko
- Iinsetjenziswa ezihlukanisako zesiginali
- Iinsetjenziswa zokuvikela ama-Surge
- Iinsetjenziswa zokuphepha
- Amamojula we-I/O ahlakaniphileko ahlukileko
- Amasango ahlakaniphileko
- Iinsetjenziswa ze-Optical Data yezebubulo
- Iinhlaziyi ze-Inthanethi ze-Dew Point
- Amamojula wokuthola idatha
- Umtjhugululi wedatha we-HART
PH6105-2A2AT(M)
Ukuhlolisisa
I-PH6105-2A2AT (M) yimodyuli yokulawula i-relay yokuphepha elungele amabhathini wokujama wesikhathi esiphuthumako, ukufakwa kweswitshi yokulawula umnyango wokuphepha, enamakhontakthi wokuphuma wokuphepha amabili angaphuzi avulekileko (NO) kanye namakhontakthi wokuphuma wokuphepha amabili avulekileko (NO) wokuphepha. Ingakhetha ukusebenza kwetjhaneli eyodwa nofana ezimbili, ukusetha kabutjha ngesandla, begodu inemisebenzi yokutjheja isekhethi emfitjhani phakathi kwetjhaneli kanye nemisebenzi yokuqapha inkinobho yokusetha kabutjha.
Idatha yethekhnikhi
| Iimfanelo zokuphakelwa kwamandla | |
| Isisetjenziswa samandla | 24V DC |
| Ukusetjenziswa kwamanje | ≤130mA(24V DC) |
| Imvamisa ye-AC | 50Hz~60Hz |
| Ukubekezelela ivoltheji | 0.85～1.1 |
| Iimfanelo zokufaka | |
| Ukujamelana kwentambo | ≤ 15 Ω |
| Faka kwamanje | ≤50mA(24V DC) |
| Isisetjenziswa sokufaka | Amabhathini we-E-Stop, isango lokuphepha |
| Ubunjalo bokuphuma | |
| Inani labathintwako | 2NO (ukuvalwa kwamsinyana)+2NO (ukuvalwa okulibazisekileko) |
| Iinsetjenziswa zokuthintana | AgSnO2 |
| Umhlobo wokuthintana | Ukunqotjhiswa okukatelelweko |
| Ukuvikelwa kwefuzi yokuthintana | 10A gL/gG, NEOZED (ukuthintana okujayelekileko) |
| Ukutjhugulula umthamo (EN 60947-5-1) | AC-15,3A/230V;DC-13,3A/24V |
| Isikhathi sokuphila somtjhini | ngaphezu kweenkhathi ezili-107 |
| Iimpawu zesikhathi | |
| Ukulibaziseka kokuvula | |
| Ukusetha kabutjha ngesandla | ≤150ms |
| Ukulibaziseka kokupheliswa kwamandla | |
| Ukujama okuphuthumako | ≤30ms |
| Ukumisa okuphuthumako (ukuthintana okulibazisekileko) | 0.1s～3s(Ukuhleleka okuzenzakalelayo kwefektri kungu-3s) |
| Ukwehluleka kwamandla | ≤100ms |
| Isikhathi sokubuyisela | |
| Ngemva kokumisa ukusebenza okuphuthumako | ≤ 30ms (ngemva kokulibaziseka kokuphendula kokuthintana) |
| Ukwehluleka kwamandla | ≤100ms |
| Nikela ukuphazamiseka okufitjhani | 20ms |
| isitifiketi sokuphepha | |
| Izinga lokusebenza (i-PL) | I-PLe ihambisana ne-EN ISO 13849 |
| Isigaba sezokuphepha (Cat.) | I-Cat.4 ihambisana ne-EN ISO 13849 |
| Isikhathi somsebenzi (TM) | Iminyaka ema-20 ihambisana ne-EN ISO 13849 |
| Ukuvikelwa kokuhlola (DC/DCavg) | 99% ihambisana ne-EN ISO 13849 |
| Izinga lokuthembeka lokuphepha (i-SIL) | I-SIL3 ivumelana ne-IEC 61508, IEC 62061 |
| Ukubekezelela amaphutha we-Hardware (HFT) | 1 ihambisana ne-IEC 61508：IEC 62061 |
| Ingcenye yokuhluleka ephephileko (SFF) | 99% ihambisana ne-IEC 61508, IEC 62061 |
| Amathuba wokuhluleka okuyingozi (PFHd) | 2.05E-10/h ivumelana ne-IEC 61508,IEC 62061 |
| Isigaba sokumisa | 0/1 ihambisana ne-EN 60204-1 |
| 10% inani eliphakathi lemijikelezo yokuhluleka okuyingozi kweengcenye (B10d) | |
| DC13,Ue=24V | Ie 3A 1A 0.75A Imijikelezo 450,000 2,000,000 2,000,000 |
| AC15,Ue=230V | Ie 5A 3A 1A Imijikelezo 70,000 400,000 10,000,000 |
| Iimfanelo zebhoduluko | |
| Ukukhambisana kwe-elekthromagnethi | ihambisana ne-EN 60947, EN 61000-6-2, EN 61000-6-4 |
| Imvamisa yokudlidliza | 10Hz~55Hz |
| Ubukhulu bokuthuthumela | 0.35mm |
| Izinga lokutjhisa | -20 ℃~+60 ℃ |
| Izinga lokutjhisa lokugcina | -40 ℃~+85 ℃ |
| Umswakama ohlobene | 10% ukuya ku-90% |
| Ukuphakama | ≤ 2000m |
| Iimpawu zokuvikela | |
| Ukuvuleka kwegezi kanye nebanga lokunyonyoba | ukuvumelana ne-EN 60947-1 |
| Izinga lokuqina kwevoltheji | III |
| Izinga lokusilaphazeka | 2 |
| Izinga lokuvikeleka | IP20 |
| Amandla wokuvikela | 1500V AC, umzuzu owodwa |
| Ivoltheji yokuvikela elinganisiweko | 250V AC |
| Ivoltheji yomfutho elinganisiweko | 6000V (1.2/50us) |
Ubukhulu bangaphandle
Umdwebo webhlogo osebenzako
Isicelo esijayelekileko
Umdwebo wokufaka iintambo
(1) Iintambo zethulusi zamukela isikhumulo sokuxhumanisa esifakwayo;
(2) Indawo yekhopha ethambileko ye-wire yokufaka kufanele ibe yikulu kune-0.5mm2, begodu ihlangothi lokukhipha kufanele libe khulu kune-1mm2;
(3) Ubude obuvulekileko bentambo bungaba yi-8mm, evalelwe ngezikulufu ze-M3;
(4) Amakhontakthi wokukhipha kufanele anikele ngokuxhumana okwaneleko kokuvikela i-fuse;
(5) Umqhubi wethusi kufanele ajamelane namazinga womtjhiso okungenani angama-75 °C;
(6) Izikulufu zetheminali zingabangela ukungasebenzi kuhle, ukutjhisa, njll. Ngalokho-ke, sibawa uyiqinise ngokuya kwe-torque etjhiwoko. I-torque yokuqinisa isikulufu setheminali 0.5Nm.
Minaukufakwa
Ama-relay wokuphepha kufanele afakwe emakhabetheni wokulawula anezinga lokuvikeleka okungenani le-IP54. Khatheso, ukufakwa nokusetjenziswa kwawo kufanele kuhambisane nemibandela efaneleko ye-GB 5226.1-2019 "Ukuphepha Kwemitjhini Negezi - Imitjhini Yemitjhini Negezi - Ingcenye 1: Imibandela Ejwayelekileko Yethekhnoloji".
I-PH6105-2A2AT(M) series safety relays zoke zifakwe nge-DIN35mm guide rails. Amagadango wokufaka alandelako
(1) Bopha umphetho ongaphezulu wethulusi ku-rail yokuqondisa;
(2) Sundulela umphetho ongezansi wethulusi ngaphakathi kwesitimela sokuqondisa.
Ukudiliza
Faka isikrufudrayiva (ububanzi be-blade ≤ 6mm) ngaphakathi kwesivalo sensimbi ekupheleni okungezansi kwephaneli yezinsimbi;
Sundulela isikrufudrayiva phezulu bese ugoqa isivalo sensimbi phasi;
Donsa iphaneli yezinsimbi phezulu begodu uphume esitimeleni sokuqondisa.
Itjhejo
Sibawa uqinisekise bona ukuphakheja komkhiqizo, imodeli yelebula yomkhiqizo, kanye nokucaciswa kuhambisana nesivumelwano sokuthenga;
Ngaphambi kokufaka nokusebenzisa ama-relay wokuphepha, funda ngokutjheja incwadi le;
Nawunemibuzo, sibawa uthintane ne-Beijing Pinghe Technical Support Hotline ku-400 711 6763;
I-relay yokuphepha kufanele ifakwe ngaphakathi kwekhabethe lokulawula elinezinga lokuvikeleka okungenani le-IP54;
24V DC ukuphakelwa kwamandla weensetjenziswa, nokusetjenziswa kwamandla we-220V AC akukavunyelwa;
Ukutjheja
(1) Sibawa uhlale uhlola bona umsebenzi wokuphepha we-safety relay usebujameni obuhle na, nokuthi ingabe kuneempawu zokuthi isekhethi nofana eyokuthoma iphazanyiswe nofana idlule;
(2) Sibawa ulandele imithetho yokuphepha efaneleko begodu usebenze ngokuya kwemilayo esebhukwini lemilayo, ngaphandle kwalokho kungabangela iingozi ezibulalako nofana ukulahlekelwa basebenzi nepahla;
(3) Imikhiqizo sele ihlolwe ngokuqinileko begodu ilawulwe ikhwalithi ngaphambi kokuphuma efemini. Nawufumana bona imikhiqizo ayisebenzi kuhle begodu usola bona imojuli yangaphakathi ayisebenzi kuhle, sibawa uthintane ne-ejenti eseduze namkha uthintane ngqo nomtato wezobuchwepheshe 400 711 6763.
(4) Eminyakeni esithandathu ukusuka ngelanga lokulethwa, yoke imiraro yekhwalithi yomkhiqizo ngesikhathi sokusetjenziswa okujayelekileko izokulungiswa yi-Pinghe simahla.