- Ibhodi yeTheminali
- Iinqabo zokuphepha ezihlukanisiweko
- Iinsetjenziswa ezihlukanisako zesiginali
- Iinsetjenziswa zokuvikela ama-Surge
- Iinsetjenziswa zokuphepha
- Amamojula we-I/O ahlakaniphileko ahlukileko
- Amasango ahlakaniphileko
- Iinsetjenziswa ze-Optical Data yezebubulo
- Iinhlaziyi ze-Inthanethi ze-Dew Point
- Amamojula wokuthola idatha
- Umtjhugululi wedatha we-HART
PH6104-2A2AT
Ukuhlolisisa
I-PH6104-2A2AT yimodyuli yokulawula i-relay yokuphepha elungele amabhathini wokujama wesikhathi esiphuthumako, ukufakwa kweswitjhi yokulawula umnyango wokuphepha, ene-2 non delay normally open (NO) safety output contacts kanye 2 delay normally open (NO) safety output contacts yama-relays wokuphepha. Ingakhetha ukusebenza kwetjhaneli eyodwa nofana ezimbili, ukusetha kabutjha ngesandla nofana ngokuzenzakalelayo, begodu inomsebenzi wokugada isekhethi emfitjhani hlangana namatjhaneli.
Idatha yethekhnikhi
| Iimfanelo zokuphakelwa kwamandla | |
| Isisetjenziswa samandla | 24V DC |
| Ukusetjenziswa kwamanje | ≤130mA(24V DC) |
| Imvamisa ye-AC | 50Hz~60Hz |
| Ukubekezelela ivoltheji | 0.85～1.1 |
| Iimfanelo zokufaka | |
| Ukujamelana kwentambo | ≤ 15 Ω |
| Faka kwamanje | ≤50mA(24V DC) |
| Isisetjenziswa sokufaka | Amabhathini we-E-Stop, isango lokuphepha |
| Ubunjalo bokuphuma | |
| Inani labathintwako | 2NO (ukuvalwa kwamsinyana)+2NO (ukuvalwa okulibazisekileko) |
| Iinsetjenziswa zokuthintana | AgSnO2 |
| Umhlobo wokuthintana | Ukunqotjhiswa okukatelelweko |
| Ukuvikelwa kwefuzi yokuthintana | 10A gL/gG, NEOZED (ukuthintana okujayelekileko) |
| Ukutjhugulula umthamo (EN 60947-5-1) | AC-15,3A/230V;DC-13,3A/24V |
| Isikhathi sokuphila somtjhini | ngaphezu kweenkhathi ezili-107 |
| Iimpawu zesikhathi | |
| Ukulibaziseka kokuvula | |
| Ukusetha kabutjha okuzenzakalelayo | ≤300ms |
| Ukusetha kabutjha ngesandla | ≤150ms |
| Ukulibaziseka kokupheliswa kwamandla | |
| Ukujama okuphuthumako | ≤30ms |
| Ukumisa okuphuthumako (ukuthintana okulibazisekileko) | 0.1s～3s(Ukuhleleka okuzenzakalelayo kwefektri kungu-3s) |
| Ukwehluleka kwamandla | ≤100ms |
| Isikhathi sokubuyisela | |
| Ngemva kokumisa ukusebenza okuphuthumako | ≤ 30ms (ngemva kokulibaziseka kokuphendula kokuthintana) |
| Ukwehluleka kwamandla | ≤100ms |
| Nikela ukuphazamiseka okufitjhani | 20ms |
| isitifiketi sokuphepha | |
| Izinga lokusebenza (i-PL) | I-PLe ihambisana ne-EN ISO 13849 |
| Isigaba sezokuphepha (Cat.) | I-Cat.4 ihambisana ne-EN ISO 13849 |
| Isikhathi somsebenzi (TM) | Iminyaka ema-20 ihambisana ne-EN ISO 13849 |
| Ukuvikelwa kokuhlola (DC/DCavg) | 99% ihambisana ne-EN ISO 13849 |
| Izinga lokuthembeka lokuphepha (i-SIL) | I-SIL3 ivumelana ne-IEC 61508, IEC 62061 |
| Ukubekezelela amaphutha we-Hardware (HFT) | 1 ihambisana ne-IEC 61508：IEC 62061 |
| Ingcenye yokuhluleka ephephileko (SFF) | 99% ihambisana ne-IEC 61508, IEC 62061 |
| Amathuba wokuhluleka okuyingozi (PFHd) | 2.05E-10/h ivumelana ne-IEC 61508,IEC 62061 |
| Isigaba sokumisa | 0/1 ihambisana ne-EN 60204-1 |
| 10% inani eliphakathi lemijikelezo yokuhluleka okuyingozi kweengcenye (B10d) | |
| DC13,Ue=24V | Ie 3A 1A 0.75A Imijikelezo 450,000 2,000,000 2,000,000 |
| AC15,Ue=230V | Ie 5A 3A 1A Imijikelezo 70,000 400,000 10,000,000 |
Ubukhulu bangaphandle
Umdwebo webhlogo osebenzako
Isicelo esijayelekileko
Umdwebo wokufaka iintambo
(1) Iintambo zethulusi zamukela isikhumulo sokuxhumanisa esifakwayo;
(2) Indawo yekhopha ethambileko ye-wire yokufaka kufanele ibe yikulu kune-0.5mm2, begodu ihlangothi lokukhipha kufanele libe khulu kune-1mm2;
(3) Ubude obuvulekileko bentambo bungaba yi-8mm, evalelwe ngezikulufu ze-M3;
(4) Amakhontakthi wokukhipha kufanele anikele ngokuxhumana okwaneleko kokuvikela i-fuse;
(5) Umqhubi wethusi kufanele ajamelane namazinga womtjhiso okungenani angama-75 °C;
(6) Izikulufu zetheminali zingabangela ukungasebenzi kuhle, ukutjhisa, njll. Ngalokho-ke, sibawa uyiqinise ngokuya kwe-torque etjhiwoko. I-torque yokuqinisa isikulufu setheminali 0.5Nm.
Ukufakwa
Ama-relay wokuphepha kufanele afakwe emakhabetheni wokulawula anezinga lokuvikeleka okungenani le-IP54. Khatheso, ukufakwa nokusetjenziswa kwawo kufanele kuhambisane nemibandela efaneleko ye-GB 5226.1-2019 "Ukuphepha Kwemitjhini Negezi - Imitjhini Yemitjhini Negezi - Ingcenye 1: Imibandela Ejwayelekileko Yethekhnoloji".
I-PH6104-2A2AT series safety relays zoke zifakwe nge-DIN35mm guide rails. Amagadango wokufaka alandelako
(1) Bopha umphetho ongaphezulu wethulusi ku-rail yokuqondisa;
(2) Sundulela umphetho ongezansi wethulusi ngaphakathi kwesitimela sokuqondisa.
Ukudiliza
Faka isikrufudrayiva (ububanzi be-blade ≤ 6mm) ngaphakathi kwesivalo sensimbi ekupheleni okungezansi kwephaneli yezinsimbi;
Sundulela isikrufudrayiva phezulu bese ugoqa isivalo sensimbi phasi;
Donsa iphaneli yezinsimbi phezulu begodu uphume esitimeleni sokuqondisa.
Itjhejo
Sibawa uqinisekise bona ukuphakheja komkhiqizo, imodeli yelebula yomkhiqizo, kanye nokucaciswa kuhambisana nesivumelwano sokuthenga;
Ngaphambi kokufaka nokusebenzisa ama-relay wokuphepha, funda ngokutjheja incwadi le;
Nawunemibuzo, sibawa uthintane ne-Beijing Pinghe Technical Support Hotline ku-400 711 6763;
I-relay yokuphepha kufanele ifakwe ngaphakathi kwekhabethe lokulawula elinezinga lokuvikeleka okungenani le-IP54;
24V DC ukuphakelwa kwamandla weensetjenziswa, nokusetjenziswa kwamandla we-220V AC akukavunyelwa;
Ukutjheja
(1) Sibawa uhlale uhlola bona umsebenzi wokuphepha we-safety relay usebujameni obuhle na, nokuthi ingabe kuneempawu zokuthi isekhethi nofana eyokuthoma iphazanyiswe nofana idlule;
(2) Sibawa ulandele imithetho yokuphepha efaneleko begodu usebenze ngokuya kwemilayo esebhukwini lemilayo, ngaphandle kwalokho kungabangela iingozi ezibulalako nofana ukulahlekelwa basebenzi nepahla;
(3) Imikhiqizo sele ihlolwe ngokuqinileko begodu ilawulwe ikhwalithi ngaphambi kokuphuma efemini. Nawufumana bona imikhiqizo ayisebenzi kuhle begodu usola bona imojuli yangaphakathi ayisebenzi kuhle, sibawa uthintane ne-ejenti eseduze namkha uthintane ngqo nomtato wezobuchwepheshe 400 711 6763.
(4) Eminyakeni esithandathu ukusuka ngelanga lokulethwa, yoke imiraro yekhwalithi yomkhiqizo ngesikhathi sokusetjenziswa okujayelekileko izokulungiswa yi-Pinghe simahla.