PHD-12TZ-*11 a ni

PHD-12TZ-*11 1 input 2 chhuak

Input: Wire pahnih emaw wire thum emaw RTD signal
A chhuahna: 4~20mA

Min rawn biak theih reng e

product chungchang chipchiar takin

Technical parameter a ni

Wiring diagram hmanga siam a ni

Certification pek a ni

Internet atanga thil lachhawng

A tlangpuiin

Safety barrier hrang hrang: PHD-12TZ-*11, RTD signal input, single input leh dual output te a ni.

Isolated safety barrier hian hazardous area-a RTD input signal chu 4-20mA signal output-ah a chantir thei a, safe area-ah a thawn thei bawk. Circuit hi single RTD signal input leh DC dual output hmanga thuam a ni.

Output 4-20mA signal, fing taka configure theih a ni. RTD range tak tak chu computer hmangin a set theih a ni.

PHD-12TZ-*11, "*" hian RTD input type a tarlang a, code hmang hian a tarlang ang.

He product hian pawn lam 20~35VDC power supply a mamawh a ni.

Input signal chi hrang hrang leh tehna range te

Code a ni	RTD model hmanga siam a ni	A tehna range	Range tlem ber a ni	Conversion dik tak a ni
1. 1. A rilru a hah lutuk chuan a rilru a buai em em a	G53	-50~150°C a ni	20°C a ni	0.2°C/0.1% a ni.
2. 2. A rilru a hah lutuk chuan a rilru a buai em em a	Cu50 a ni	-50~150°C a ni	20°C a ni	0.2°C/0.1% a ni.
4. 4. A rilru a hah lutuk chuan a rilru a buai em em a	Pt100 a ni	-200~850°C a ni	20°C a ni	0.2°C/0.1% a ni.
6. 6. A rilru a hah lutuk chuan a rilru a buai em em a	Pt1000 a ni	-200~850°C a ni	20°C a ni	0.2°C/0.1% a ni.
7. A rilru a hah lutuk	Ni1000 a ni	-60~250°C a ni	20°C a ni	0.2°C/0.1% a ni.

Entirnan: Isolated safety barrier Pt100 input, temperature range 0~400°C, output pahnih 4~20mA, power supply 20~35VDC nei, model chu PHD-12TZ-411 (0~400°C) a ni a, a tehna range chu computer hmangin 0~400°C a bituk range-ah set theih a ni

* Bus terminal power supply, a chipchiar zawkna chu appendix en la.

A chiang zawk
Supply voltage a awm	20~35VDC, Power hman: 24VDC power supply a nih chuan 20mA output ≤70mA(PHD-12TZ-*11) a ni a, a man pawh a tlawm hle.
Signal input a ni	Wire pahnih emaw wire thum emaw RTD
A chhuahna signal a ni	4~20mA a ni
Signal leh tehna range	Signal range: RTD tehna range nena inmil
	Signal range: RTD tehna range nena inmil
	Measurement range: Order siam dawnin user chuan configuration chu a siam tur a ni a, chu chu tail number-ah emaw extra explained-ah emaw tarlan tur a ni.
Output load theihna phalsak a ni	0~500Ω(a duh angin a siam theih)
Alarm tih hriattirna	L1 light chu low-measurement range alarm-ah a on a; L2 light chu high-measurement range alarm-ah a on a ni
Channel number ah input leh output a awm	1 input 2 output a awm
Field device hman tur hrang hrang	2-wire emaw 3-wire RTD(G53, Cu50, Pt100, Pt1000, Ni1000) hmanga siam a ni.
Output dik tak a ni	0.1%FS (A hlutna tlangpui: 0.05%FS) a ni.
Temperature a inthlak danglam thin	0.005%FS/°C a ni
Temperature parameter hrang hrangte	Hnathawh lumna: -20°C~+60°C, dahna hmun:-40°C~+80°C
Relative humidity a awm lo	10%~95% RH ah chuan condensation a awm lo
Dielectric chakna a ni	Intrinsically safe side leh non-intrinsically safe side inkar (≥ 3000VAC/min); power supply leh non-intrinsically safe terminal (≥ 1500VAC/min) inkar a ni.
Insulation a do theih loh	≥100MΩ (input/output/power supply inkar) a ni.
Pawn lam dimensions te	A thuk zawng 12.5mm x a zau zawng 108mm x a san zawng 118mm
Electromagnetic nena inmil theihna	IEC 61326-1(GB/T 18268) ang chuan, IEC 61326-3-1
Functional safety certification pek a ni	SIL3 chu IEC 61508 standard angin a ni
Puak thei lo chhinchhiahna	[Ex ia Ga] IIC [Ex ia Da] IIIC
Certification Body a ni	CQST(China National Quality Supervision leh Explosion Protected Electrical Products te enfiahna hmun)
Terminal 3-2、4-2 ah a awm	Um:250V AC/DC Uo=8.4V DC Io=31mA a ni thei bawk Po=65.1mW Co=4.8μF Lo=20mH a ni
Installation hmun a ni	Safe zone-a dah a nih chuan Zone 0, IIC, Zone 20, leh IIIC thlenga hmun hlauhawma intrinsic safety instrument-te nen a inzawm thei a ni
MTBF	≤100000h a ni