PHD-12TZ-*11, ɛn di ɔda wan dɛn

PHD-12TZ-*11 1 input 2 autput dɛn

Input: Tu-way ɔ tri-way RTD signal
Output: 4 ~ 20mA

Kɔntakt wi

di ditel dɛn bɔt di prɔdak

Teknik paramita

Dayagram fɔ waya

Sɛtifiket fɔ di wok

Dɔŋlod

Ovaviu fɔ di tin dɛn we dɛn dɔn lan

Isolet sefty barɛri: PHD-12TZ-*11, RTD signal input, singl input ɛn dual ɔtput.

Di isol sefty barɛri kin kɔnvɔyt di RTD input signal na hazardous eria to 4-20mA signal autput ɛn transmit am to di sef eria. Di sɔrkwit gɛt singl RTD signal input ɛn DC dual ɔtput.

Di autput 4-20mA signal, kin bi intelligently konfigyuret. Di aktual rεnj fɔ RTD kin bi bay kɔmpyuta.

PHD-12TZ-*11, "*" de sho di input tayp fɔ RTD, duya yuz di kɔd fɔ sho.

Dis prodak nid wan eksternal 20 ~ 35VDC pawa saplai.

Input signal tayp ɛn mɛzhɔmɛnt rɛnj

Kɔd	RTD mɔdel	Di rεnj fɔ mɛzhɔ	Minimum rεnj	Kɔnvɔshɔn kɔrɛkt we
1. 1. 1.	G53	-50 ~ 150 ° C	20°C	0,2°C/0,1% na di .
2. 2.	Cu50 we yu de du	-50 ~ 150 ° C	20°C	0,2°C/0,1% na di .
4. 4.	Pt100 we de na di wɔl	-200 ~ 850 ° C	20°C	0,2°C/0,1% na di .
6. 6.	Pt1000 we gɛt fɔ du wit	-200 ~ 850 ° C	20°C	0,2°C/0,1% na di .
7. 7.	Ni1000 we yu de du	-60 ~ 250 ° C	20°C	0,2°C/0,1% na di .

Example: Isolated sefty baria Pt100 input, temperechur rεnj 0 ~ 400°C, wit tu autput 4 ~ 20mA, pawa saplai 20 ~ 35VDC, di mכdel na PHD-12TZ-411 (0 ~ 400 ° C), di mεjכmεnt rεnj kin set to di spεsifi k rεnj 0 ~ 400°C bay kכmpyuta

* Bus terminal pawa saplai, duya luk apɛndiks fɔ di ditel dɛn.

Spɛsifikeshɔn dɛn
Voltaj we di saplae de gi	20 ~ 35VDC, Pawa konsumpshɔn: We 24VDC pawa saplai, 20mA autput ≤70mA (PHD-12TZ-*11) Di wan dɛn we de wok fɔ di kɔmni.
Input signal fɔ yuz	Tu-waya ɔ tri-way RTD
Signal we de kɔmɔt na di ɔtput	4 ~ 20mA we yu de
Sayn ɛn mɛzhɔmɛnt rɛnj	Signal rεnj: we kכrεspכnd to di mεzhɔmεnt rεnj fכ RTD
	Signal rεnj: we kכrεspכnd to di mεzhɔmεnt rεnj fכ RTD
	Mɛzhɔmɛnt rɛnj: We dɛn mek ɔda, di pɔsin we de yuz am fɔ mek di kɔnfigyushɔn bay insɛf, we dɛn fɔ sho na di tel nɔmba ɔ ɛkstra ɛksplen.
Alawable autput lod kapasiti	0 ~ 500Ω(we yu kin kɔstɔmayz)
Alam indikashɔn	L1 layt de on na low-measurement range alarm; L2 layt de on na ay-mɛzhɔmɛnt rɛnj alam
Chanɛl nɔmba fɔ input ɛn ɔtput	1 input 2 ɔtput dɛn
Fil divays dɛn we dɛn kin yuz	2-waya ɔ 3-way RTD(G53, Cu50, Pt100, Pt1000, Ni1000)
Ɔtput akkuracy	0.1%FS (Tipik valyu: 0.05%FS)
Tɛmpratura drift	0.005%FS/°C
Di paramita dɛn fɔ di tɛmpracha	Wok temperechur: -20 ° C ~ + 60 ° C, stכrej tεmprachכ:-40 ° C ~ + 80 ° C
Rilativ humiditi	10%~95% RH no kondensashɔn
Dielektrik trɛnk	Bitwin intrinsically sef sayd ɛn nɔ-intrinsically sef sayd (≥ 3000VAC/min); bitwin pawa saplai ɛn nɔ-intrinsically sef tɛminal (≥ 1500VAC/min)
Insuleshɔn rɛsistɛns	≥100MΩ (bitwin input/ɔtput/pawa saplai)
Dimɛnshɔn dɛn we de na do	Tik 12,5mm x wit 108mm x ay 118mm
Ilɛktromagnetik kɔmpatibiliti	Akɔdin to IEC 61326-1(GB/T 18268), IEC 61326-3-1
Fɔnishɔnal sefty sɛtifikeshɔn	SIL3 akɔdin to IEC 61508 standad dɛn
Mak we nɔ de bɔn	[Ɛks ia Ga] IIC [Ɛks ia Da] IIIC
Sɛtifiket Bɔdi	CQST(China Nashɔnal Kwaliti Supavayshɔn ɛn Tɛst Sɛnta fɔ Ɛksplɔshɔn Protɛkt Ilɛktrik Prodakt dɛn)
Tɛminal dɛn 3-2、4-2	Um:250V AC/DC Uo=8.4V DC Io=31mA Po=65.1mW Co=4.8μF Lo=20mH
Di ples we dɛn kin instɔl am	If dɛn instɔl am na say we sef, dɛn kin kɔnɛkt am to intrinsik sefty inschrumɛnt dɛn na say dɛn we gɛt prɔblɛm te to Zɔn 0, IIC, Zɔn 20, ɛn IIIC
MTBF	≤100000h na wan