A rilru a hah lutuk chuan a rilru a buai em em a. PHD-12TP-111

PHD-11TP-11 1 input 1 chhuahna

PHD-12TP-111 1 input 2 output a awm a

Input :Frequency signal a awm a

Output:DC signal a ni

Min rawn biak theih reng e

product chungchang chipchiar takin

Technical parameter a ni

Wiring diagram hmanga siam a ni

Certification pek a ni

Internet atanga thil lachhawng

A tlangpuiin

Frequency input signal isolator, input tawp lama frequency signal chu user-in range a set angin DC signal output to safety barrier-ah a chantir thin.

He product hian independent powered a mamawh a, power supply, input leh output te hi a inthlau hle.

A rilru a hah lutuk chuan a rilru a buai em em a. 1. PHD-12TP-111 1

A sawifiahna
Hriselna hmuna input
Frequency signal input a ni	Input frequency:0.1Hz~100kHz a ni Input voltage phal zat sang ber:30Vp-p Input level tlem ber: 2V,(2Hz~100kHz) 2V,(0.1Hz~100kHz) a ni a, a man pawh a tlawm hle.
Output chu hmun him takah a awm
A chhuahna signal a ni	0~20mA、4~20mA、0~5V、0~10V a ni
Tuna output load resistance a awm mek	≤350Ω a ni
Voltage chhuahna load resistance a awm	≥300Ω a ni
Parameter bulpui ber berte
Power supply a ni	20-35DC thleng a ni
Power hmanralna a ni	≤45mA24V power supply a ni a, 20mA a chhuak thei bawk
Impulse zau zawng a ni	≥2μs a ni
Output dik tak a ni	0.1% FS a ni
Temperature a inthlak danglam thin	0.01% FS/C Input signal fault detection function chungchang chipchiar zawka hriat duh chuan a hman tur manual en rawh
Hnathawh dan lum leh vawt	-20°C~+60°C a ni
dahna hmun lum leh vawt	-40°C~+80°C a ni
Relative humidity a awm lo	10%~95%RH (Condensation awm lo)
EMC a ni	GB/T 18268(IEC 61326-1) atanga a lan dan chuan
Insulation chakna a ni	Intrinsically safe side leh non-intrinsicallysafe side inkar ah ≥2500V AC/min
Insulation a do theih loh	≥100MΩ(input/output/power supply inkar) a ni.
Wire mamawh a ni	Cross-section≥0.5mm2 a ni Insualtion chakna≥500V
Installation hmun a ni	Safe zone-a dah a nih chuan Zone 0, IIC, Zone 20, leh IIIC thlenga hmun hlauhawma intrinsic safety instrument-te nen a inzawm thei a ni
Field hmanrua hman tur	Level impulse signal a ni
Safety certification pek a ni
Puak thei lo chhinchhiahna	[Ex atanga Ga] IIC [Ex atanga Da] IIIC
Puak thei lo standard a ni	GB/T 3836.1-2021, GB/T 3836.4-2021 te a ni
Terminal 5-6 thleng a awm	A rilru a buai em em a, a rilru a hah em em bawk a. Um=250V AC/DC,Uo=14V DC,Io=8mA, Po=28mW,Co=0.73μF,Lo=150mH a ni
Certification siamtu pawl a ni	Shanghai-a Inspection leh Testing Institute of Instruments and Automation Systems (SITIIAS) chuan a sawi chhuak a, a hlawhtlinna chu a hlawhtlinna a ni.

A rilru a hah lutuk chuan a rilru a buai em em a. PHD-12TP-111M

NOTE:1、PHD-11TP-11 hian output part 2 a huam lo 2、Power rail function hi optional function a ni a, a hmangtute chuan order an siam dawnin power supply method an tarlan a ngai Power rail connector thlan dan chu "Annex" phek 89-ah en theih a ni.

PHD-11TC-33A-23-ah a awm bawk

PH-Co series RS422 Control Net bus data optical hmanga siam a ni a, a man pawh a to hle.

PHM-7230 Ex Intrinsically Safe Isolated a ni a, a chhuahna tur hmun leh a hmanna tur hmun chu a inthlau hle.