- Terminal Board-ah hian a awm a
- Hriselna atana harsatna awmte
- Signal Isolators te pawh a awm
- Surge laka invenna hmanrua te
- Safety Relay te a awm bawk
- Intelligent I/O Module hrang hrang awmte
- Gateways fing tak tak te
- Industrial Data Optical Transceiver hmanga siam a ni
- Online hmanga Dew Point thlirletna
- Data lakkhawmna Modules te
- HART data converter a ni
PHD-11HZ-*1 a ni
A tlangpuiin
Product hian power supply hran a mamawh a, power, input leh output atan triple isolation a nei bawk.
"*" hian thermocouple input type a tarlang a, code nei model bik (a hnuaia lem en rawh)
| Input signal chi hrang hrang leh tehna range te | ||||
| Code a ni | RTD model hmanga siam a ni | A tehna range | Range tlem ber a ni | Conversion dik tak a ni |
| 1. 1. A rilru a hah lutuk chuan a rilru a buai em em a | G53 | -50~150°C a ni | 20°C a ni | 0.2°C/0.1% a ni. |
| 2. 2. A rilru a hah lutuk chuan a rilru a buai em em a | G50 a ni | -50~150°C a ni | 20°C a ni | 0.2°C/0.1% a ni. |
| 4. 4. A rilru a hah lutuk chuan a rilru a buai em em a | Pt100 a ni | -200~850°C a ni | 20°C a ni | 0.2°C/0.1% a ni. |
| 6. 6. A rilru a hah lutuk chuan a rilru a buai em em a | Pt1000 a ni | -200~850°C a ni | 20°C a ni | 0.2°C/0.1% a ni. |
| 7. A rilru a hah lutuk | Ni1000 a ni | -60~250°C a ni | 20°C a ni | 0.2°C/0.1% a ni. |
Channel awm zat: | input pakhat leh output pakhat a awm bawk |
Power supply: 1.1. |
|
Power supply voltage chu: | 20~35V DC, power hmang 1.2W vel (24V DC, output 20mA) a ni. |
Power venhimna: 1.1. | power reverse hmanga venhimna a ni |
Hlauhawm lam input: |
|
Input Signal a awm a: | 2-wire emaw 3-wire emaw RTD signal ("Input Signal Type leh Range Table" en rawh) |
Signal awmna hmun: | RTDs tehna range nena inmil. |
A tehna hmun: 1.1. | user chuan order a tih hunah anmahni configuration siam turin, end number emaw instruction dang emaw-ah tarlan a ni |
Safety lam atanga chhuak: |
|
A chhuahna signal: 1.1. | 4~20mA a ni |
Output Load Capacity phalsak chu: | 0～500Ω (A duh angin a siam theih) |
LED hmanga chhinchhiahna: | Green ⸺Power chhinchhiahna; Low range alarm atan L1 light on a ni a; High range alarm atan L2 light on a ni. |
Output dikna: 1.1. | "Input signal chi leh range table" tih en rawh. |
Chhanna hun: 1.1. | 300ms atanga 90% thleng a ni |
Temperature Drift a awm chuan: | 0.005%FS/°C a ni |
Temperature parameter hrang hrang: 1.1. | hnathawhna hmun -20°C~+60°C; a dahna hmun -40°C~+80°C |
Thli lum leh vawt (air relative humidity): 1.1. | 10%~95%RH a ni a, condensation a awm lo |
Insulation chakna: 1.1. | intrinsically safe end leh non-intrinsically safe end (≥3000V AC/min); power supply leh non-intrinsically safe (≥1500V AC/min) inkar a ni. |
Insulation do theihna: 1.1. | ≥100MΩ (input/output/power supply inkar) a ni. |
Electromagnetic nena inmil theihna: | IEC 61326-1 (GB/T 18268), IEC 61326-3-1 nena inmil a ni |
Hlawhchhamna hun chhung (mean time): | darkar 100000 chhung a ni |
Wire mamawh tur: 1.1. | a cross-section chu ≥ 0.5mm2 a ni a; insulation chakna ≥ 500V a ni |
Field device hman tur: 1.1. | 2-wire emaw 3-wire emaw RTD G53, Cu50, Pt100, Pt1000, Ni1000 hmanga siam a ni |
Installation na hmun: | safe zone-a dah a nih chuan, intrinsically safe instrumentation-a Zone 0, IIC, Zone 20, IIIC-a hmun hlauhawm ber berte nen inzawm theih a ni |
