Analog Output a ni
- Terminal Board-ah hian a awm a
- Hriselna atana harsatna awmte
- Signal Isolators te pawh a awm
- Surge laka invenna hmanrua te
- Safety Relay te a awm bawk
- Intelligent I/O Module hrang hrang awmte
- Gateways fing tak tak te
- Industrial Data Optical Transceiver hmanga siam a ni
- Online hmanga Dew Point thlirletna
- Data lakkhawmna Modules te
- HART data converter a ni
01 a ni02 a ni03 a ni
PHC-11TD-11/ PHC-12TD-111 hmanga siam a ni
A tlangpuiin
Analog output isolated safety barrier hian safe area-a instruments atanga hmun hlauhawma 4~20mA signals isolated transmission chu a realize thei a, valve positioner, electric/pneumatic converter leh hmanraw dangte chu a hmunah a khalh thei a, HART digital signals bidirectional transmission pawh a pui thei bawk. He product hian independent power supply a mamawh a, power supply, input leh output te chu isolated a ni.
| Supply voltage a awm | 20~35V DC, Power hman zat: 24V power supply, 20mA output ≤50mA(PHC-11TD-11) a ni. ≤80mA(PHC-12TD-111) a ni. |
| Signal input a ni | 4~20mA (HART digital signal) a ni. |
| A chhuahna signal a ni | 4~20mA (HART digital signal) a ni. |
| Load resistance a awm thei | 20mA output a nih chuan, 0~800 Ω (customizable) a ni. |
| Output dik tak a ni | 0.1%FS(A hlutna tlangpui:0.05%FS) |
| Temperature a inthlak danglam thin | 0.005%FS/°C a ni |
| Input leh output channel awm zat | 1 input 1 output(PHC-11TD-11);1 input 2 chhuahna(PHC-11TD-211) |
| File hmanraw hman tur | Valve dahna tur, electric/pneumatic converter hmanga siam a ni |
| Temperature parameter hrang hrangte | Hnathawh lumna: -20°C~+60°C, dahna hmun:-40°C~+80°C |
| Relative humidity a awm lo | 10%~85% RH ah chuan condensation a awm lo |
| Dielectric chakna a ni | Intrinsically safe side leh non-intrinsically safe side inkar (≥ 3000VAC/min); power supply leh non-intrinsically safe terminal (≥ 1500VAC/min) inkar a ni. |
| Insulation a do theih loh | ≥100MΩ (input/output/power supply inkar) a ni. |
| Pawn lam dimensions te | A thuk zawng 12.5mm x a zau zawng 108mm x a san zawng 118mm |
| Electromagnetic nena inmil theihna | IEC 61326-1(GB/T 18268) ang chuan, IEC 61326-3-1 |
| Puak thei lo chhinchhiahna | [Ex ia Ga] IIC [Ex ia Da] IIIC |
| Certification Body a ni | CQST(China National Quality Supervision leh Explosion Protected Electrical Products te enfiahna hmun) |
| Terminal-ah 1-2, 3-4 in hnehna an chang a: | A rilru a buai em em a, a rilru a hah em em bawk a. 28V DC Io=93mA Po=0.65W Co=0.083μF Lo=4.2mH a ni |
| Installation hmun a ni | Safe zone-a dah a nih chuan Zone 0, IIC, Zone 20, leh IIIC thlenga hmun hlauhawma intrinsic safety instrument-te nen a inzawm thei a ni
|
| MTBF | 100000h a ni |
Note: 1. PHC-11TD-11 ah hian output 2 a awm lo.
2. Power rail power supply hi duhthlan tur a ni. User te chuan an mamawh a ni
order i tih hunah power supply mode kha tarlang rawh. Khawngaihin attachment ah hian en theih a ni
phek 89-ah a awm.
PHD-11TC-33A-23-ah a awm bawk
PHC-11TD-11 hmanga siam a ni