PHC-11TD-11/ PHC-12TD-111

PHC-11TD-11 1 input 1 output

PHC-12TD-111 1 input 2 outputs

Input:4~20mA (HART digital signal)

Output:4~20mA (HART digital signal)

Wec kudwa

lembe ikum piny

Piny ma pire tek

Cal pa waya

Certification

Telo

Neno wi lembe

Analog output isolated safety barrier copo ketho 4~20mA signals kud i jam tic ma juketho i kabedo ma ber ni kabedo ma rac, tero valve positioner, electric/pneumatic converter man jam tic mange i kabedo, man konyo cwalo signals mi HART digital. Piny eni mitu kero ma tiye kende, man kero, piny ma donjo man ma wok woko gipokere.

Voltage mi mio	20~35V DC, Tiyu ku mac: 24V kero, 20mA ma wok ≤50mA(PHC-11TD-11) ≤80mA(PHC-12TD-111)
Lanyuth mi ketho	4~20mA (HART digital signal)
Lanyuth mawok	4~20mA (HART digital signal)
Teko pa pek	Ka juwodho 20mA, 0~800 Ω (ma jucopo loko)
Ber pa adwogi	0.1%FS(Typical value:0.05%FS)
Lokruok pa lyethu	0.005%FS/°C
Namba pa yore mi ketho man mi wodhu	1 input 1 output(PHC-11TD-11);1 input 2 outputs(PHC-11TD-211)
Jam tic ma jutiyo kudu	Valve positioner, mac/pneumatic converter
Piny ma mako lyethu	Lyethu mi tic: -20°C~+60°C, lyethu mi kano piny:-40°C~+80°C
Piny ma ngic	10%~85% RH epe ku pii
Teko pa dielectric	Ikind thenge ma ber man thenge ma ber ongo (≥ 3000VAC/min); ikind kero pa mac ku terminal ma ber ongo (≥ 1500VAC/min)
Teko pa lyethu	≥100MΩ (ikind piny ma wok/wok woko/miyo kero)
Kite ma woko	Lar 12.5mm x lac 108mm x bor 118mm
Ber pa mac	Ni lubre ku IEC 61326-1(GB/T 18268), IEC 61326-3-1
Lanyuth ma jwigere ngo	[Ex ia Ga] IIC [Ex ia Da] ⅢC
Ju ma mio certificate	CQST (China National Quality Supervision and Test Center for Explosion Protected Electrical Products)
Terminals 1-2, 3-4:	Um:250V AC/DC Uo=28V DC Io=93mA Po=0.65W Co=0.083μF Lo=4.2mH
Kabedo mi ketho	Ka juketho i kabedo ma ber, ecopu bedu ku jam tic mi gwoko kwo i kabedo ma rac nitundu i Zone 0, IIC, Zone 20, man IIIC
MTBF	100000h