- Terminal Board
- Jam gwoko kwo ma juketho kende
- Jam poko lanyuth
- Jam tic mi gwoko kwo pa dhanu
- Relays mi gwoko kwo
- I/O Modules ma rieko ma jupoko
- Dhugola ma rieko
- Jam tic ma tiyo ku mac
- Dew Point Analyzers mi intanet
- Module mi nwangu lembe
- HART data converter
PHG-11SZ series
Neno wi lembe
lRTD signal input, DC signal output, single input and signal output.
lKu ryeko, rwom pa RTD copo bedu ku kompyuta.
lI "Common models and parameters" namba "8" nyutho "customizable".
Lembe ma pire tek
| RTD excitation current | 800uA |
| Kero pa piny | Kit kero ma kawoni≤500Ω, kit kero ma kawoni |
| Ber pa adwogi | 0.1%FS |
| Lokruok pa lyethu | 0.005% FS/°C |
| Piny ma mako lyethu lyethu mi tic | -20°C~+60°C, lyethu mi kano piny: -40°C~+80°C |
| Piny ma ngic | 10%~95% RH epe ku pii |
| Teko pa lyethu | Ikind piny ma juketho i iye ku ma juwodho woko, ikind piny ma juketho i iye, piny ma juwodho woko man kero ma jumiyo≥100MΩ (500VDC) |
| Teko pa dielectric | Ikind piny ma juketho i iye ku ma juwodho woko, ikind piny ma juketho i iye, piny ma juwodho woko man kero ma jumiyo≥2000VAC/min |
| Ber pa mac | GB/T 18268(IEC 61326-1） |
| Mio mac | 24VDC±10% |
| Saa mi dwoko wang lembe | ＜100ms |
| Tiyu ku mac | Adwogi ma kawoni |
| MTBF | 8000(sawa） |
Dikiri
Cal ma nen man tic mi thum
|
Terminal |
Terminal tic | ||
| 1 | Mio mac+ | 24VDC±10% | |
| 2 | Mio mac- | ||
|
| 2-thol | 3-thol |
|
| 5 | Keth+ | Keth+ |
RTD lanyuth |
| 6 | Keth- | Keth- | |
| 7 | Cek makore ku terminal 6 | Keth- | |
| 3 | Output+ |
DC lanyuth | |
| 4 | Adwogi- | ||
Thelembe pa lanyuth
| Jam tic thelembene | |
|
Code |
Adwogi parameters |
| 1 | 4～20mA |
| 2 | 0～20mA |
| 3 | 0～5V |
| 4 | 0～10V |
| 5 | 1～5V |
| 6 | 1:1 |
| 7 | ±10V |
| 8 | Customizing |
| Jam tic thelembene | ||||
|
Code |
RTD lanyuth |
Pima ikind |
Ma nok loyo ikind |
Lokruok atira |
| 1 | G53 | -50～150°C | 20°C | 0.2℃/0.1% |
| 2 | Cu50 | -50～150°C | 20°C | 0.2℃/0.1% |
| 4 | Pt100 | -200～850°C | 20°C | 0.2℃/0.1% |
| 6 | Pt1000 | -200～850°C | 20°C | 0.2℃/0.1% |
| 7 | Ni1000 | -60～250°C | 20°C | 0.2℃/0.1% |
Model man parameters ma rwinyo
| Lanyuth
| Namba mi channel
| Keth
| Adwogi
| Kite ma kero pa mac utiye kudu
|
| PHG-11SZ-41 | 1 input 1 output | Pt100(-200～850°C) | 4～20mA | 24VDC |
| PHG-11SZ-42 | 1 input 1 output | Pt100(-200～850°C) | 0～20mA | 24VDC |
| PHG-11SZ-43 | 1 input 1 output | Pt100(-200～850°C) | 0～5V | 24VDC |
| PHG-11SZ-44 | 1 input 1 output | Pt100(-200～850°C) | 0～10V | 24VDC |
| PHG-11SZ-45 | 1 input 1 output | Pt100(-200～850°C) | 1～5V | 24VDC |
| PHG-11SZ-47 | 1 input 1 output | Pt100(-200～850°C) | ±10V | 24VDC |
| PHG-11SZ-11 | 1 input 1 output | G53(-50～150°C) | 4～20mA | 24VDC |
| PHG-11SZ-21 | 1 input 1 output | Cu50(-50～150°C) | 4～20mA | 24VDC |
| PHG-11SZ-61 | 1 input 1 output | Pt1000(-200～850°C) | 4～20mA | 24VDC |
| PHG-11SZ-71 | 1 input 1 output | Ni1000(-60～250°C) | 4～20mA | 24VDC |
| PHG-11SZ-88 | 1 input 1 output | Jucopo loko | Jucopo loko | 24VDC |
Nyuthu piny