- Terminal Board
- Gin ma gengo gwok ma ki poko
- Gin ma poko lanyut
- Jami ma gwoko kom ki i mac
- Jami ma gwoko kuc
- I/O Modules ma ki poko gii ma ryek
- doggola ma ryek
- Jami ma ki lwongo ni Industrial Data Optical Transceivers
- Jami ma ki lwongo ni Dew Point Analyzers ma tye i intanet
- Jami ma ki tiyo kwede me nongo ngec
- HART gin ma loko ngec
PHD-12HT-*11
Neno matut
Kit me keto lanyut ki rwom me tebol | ||||
Namba | Labol me Thermocouple | Piimo rwom | Bor ma nok loyo | Lok ma atir |
1 | K | -200~1370°C | 50°C | 0.5°C/ 0.1% |
2 | S | -50~1760°C | 50°C | 1.5°C/ 0.1% |
3 | KI | -140~1000°C | 50°C | 0.5°C/ 0.1% |
4 | J | -160~1200°C | 500°C | 0.5°C/ 0.1% |
5 | B | 250~1800°C | 50°C | 1.5°C/ 0.1% |
6 | T | -200~400°C | 500°C | 0.5°C/ 0.1% |
7 | R | -50~1760°C | 50°C | 1.5°C/ 0.1% |
8 | N | -200~1300°C | 500°C | 0.5°C/ 0.1% |
Jami ma pire tek me tic |
|
Wel yoo: | gin acel ma ki keto iye ki gin ma ki kato ki iye aryo |
Ka miyo teko: |
|
Teko ma miyo teko: | 20~35V DC, tic ki teko ma romo 1.8W (24V DC, ma kato 20mA) |
Gwoko teko: | gwok ma dwoko cen teko |
Gin ma kelo peko: |
|
Gin ma ki keto: | K, S, E, J, B, T, R, N thermocouple signals (nen "Input Signal Types and Ranges Table") |
Kabedo me lanyut: | Ma rwate ki rwom me pimo pa thermocouple -10~100mV. |
Kit me pimo: | ngat ma tiyo kwede me yubu kit ma en tye ka tic kwede ka tye ka lwongo, ma ki waco i namba me agiki onyo cik mukene |
Gin ma ki yubu i kom gin ma ki lwongo ni cold end compensation: | ±1°C (kompensation range -20°C~+60°C) |
Lok ma mako lok me gwok: |
|
Gin ma ki cwalo: | 4~20mA |
Kit ma ki yer me tic kwede: | 0～500Ω (Customizable) |
Lanyut me LED: | Green ⸺ Gin ma nyutu teko; L1 mac tye ka lyel pi alarm ma tye piny; L2 mac tye ka lyel pi alarm mabor. |
Kit ma atir kwede: | Nen "Kit me keto lanyut ki rwom me tebol". |
Cawa me gamo lapeny: | 500ms me 90% me wel me agiki |
Lok pa lyeto: | 0.005%FS/°C |
Jami ma kwako lyeto: | lyeto me tic -20°C~+60°C; lyeto me gwoko -40°C~+80°C |
Yamo ma rwate ki yamo: | 10%~95%RH labongo pii ma mol |
Teko me gengo lyeto: | agiki ma ki gwoko maber ki agiki ma pe ki gwoko maber (≥3000V AC/min); i kin teko ki ma pe ki gwoko (≥1500V AC/min) |
Gin ma gengo lyeto: | ≥100MΩ (gin ma ki keto/ki kwanyo/miyo teko i kin) |
Kit ma mac twero tic kwede: | ma rwate ki IEC 61326-1 (GB/T 18268), IEC 61326-3-1 |
Kare me rweny: | cawa 100000 |
Jami ma mite pi waya: | dul ma ki poko ≥ 0.5mm2; teko me gengo lyeto ≥ 500V |
Jami ma tiyo i gang tic: | Jami ma tiyo i poto: K, S, E, J, B, T, R, N thermocouple sensor |
Kabedo me keto: | ki keto i kabedo ma ki gwoko maber, ki twero kubu ki kabedo ma malo loyo i kabedo 0, IIC, kabedo 20, IIIC ma tye ki jami ma twero kelo peko |
Karatac me gwoko kwo |
|
Dul ma miiyo twero: | Kabedo me wilobo ma neno ki temo jami ma tiyo ki mac ma pe twero wango CQST |
Cik me moko ni: | GB/T 3836.1-2021, GB/T 3836.4-2021 |
Lanyut me gengo mwoc: | [Exia Ga]ⅡC, [Exia Da]ⅢC |
Jami ma ki moko (i kin dul 1-2): | Um: 250V AC/DC, Uo=8.4V DC, Io=31mA, |
