- Guddiga Terminalka
- Caqabadaha Badbaadada ee Go'doonsan
- Kala-goysyada Calaamadaha
- Qalabka Ilaalinta Kororka
- Gudbinta Badbaadada
- Modules-yada I/O ee Caqliga leh ee Go'doonsan
- Albaabada Caqliga leh
- Xogta Warshadaha ee Gudbiyaasha Indhaha
- Falanqeeyayaasha Dhibcaha Dew ee Khadka Tooska ah
- Qaybaha Helitaanka Xogta
- Beddelaha xogta HART
PHD-11TF-29
Dulmar Guud
Badeecadani waxay u baahan tahay koronto madax-bannaan, oo leh koronto go'doonsan, gelinta, iyo terminaalka wax soo saarka.
Tilmaamaha |
|
Gelinta aagga dhibka badan |
|
Calaamadda gelinta | Beddel badhanka xiriirada/badhanka u dhow |
Danabka sahayda ee dareemaha | Ku dhawaad 8V |
Heerka beddelka | ≤5kHz |
Sifooyinka gelinta/soo-saarka: |
|
Hadda gelinta goobta | >2.1mA, wax soo saarku waa xiran yahay, taasoo tilmaamaysa ON; |
Kala-guurka xaaladda gelinta iyo badhanka digniinta: | Marka badhanka garaaca K1 uu ku yaal dhinaca "ON", xaaladda wax soo saarku waxay ka soo horjeeddaa xaaladda gelinta. |
Soo saarista meel ammaan ah |
|
Calaamadda soo baxaysa | Transistor (iska caabin), danab u adkaysi badan ≤ 30V DC |
Astaamaha soo saarista | Marka danab korontada dibadda ah uu yahay 8V, iska caabbinta digniinta wareegga gaaban waa ≤240Ω, |
Xuduudaha aasaasiga ah |
|
Danab bixinta | 20 ~ 35V DC |
Isticmaalka Awoodda | ≤30mA (24V korontada, marka transistor-ka la shido) |
Tilmaamaha LED-ka | Cagaar: Tilmaamaha tamarta |
Xuduudaha heerkulka | Heerkulka Shaqada: -20℃ ~ +60℃, |
Qoyaan qaraabo ah | 10% ~ 95% RH ma jiro uumi-bax |
Xoogga dahaarka | Inta u dhaxaysa dhinaca gudaha ee badbaadada leh iyo dhinaca aan gudaha ahayn ee badbaadada leh (≥3000VAC/daqiiqo) |
Iska caabinta dahaarka | ≥100MΩ (inta u dhaxaysa gelinta/soo-saarka/korontada) |
EMC | Sida waafaqsan IEC 61326-1 (GB/T 18268), IEC 61326-3-1 |
Shuruudaha fiilada | Qaybta isgoyska ah ≥ 0.5mm²; Xoogga dahaarka ≥ 500V |
Qalabka goobta ee khuseeya | Qalabka goobta sida xiriirada qalalan ama gelinta badhanka u dhow ee nooca NAMUR oo u hoggaansan heerka DIN19234 |
Goobta rakibidda | Iyada oo lagu rakibay aag ammaan ah, waxaa lagu xidhi karaa qalabka badbaadada gudaha ee meelaha khatarta ah ilaa Aagga 0, IIC, Aagga 20, iyo IIC. |
| Shahaado ammaan ah | |
| Calaamadda qaraxa u adkeysan karta | [Ex ia Ga] IIC [Ex ia Da] ⅢC |
| Heerka u adkeysiga qaraxa | GB/T 3836.1-2021 GB/T 3836.4-2021 |
| Terminalada 3-4 | Um: 250V AC/DC, Uo = 10.5V DC, Io = 15mA, Po=39.4W，Co=1.7μF，Lo=165mH. |
| Hay'adda shahaadada | CQST (Xarunta Kormeerka Tayada Qaranka ee Shiinaha iyo Tijaabada Badeecadaha Korontada ee la Ilaaliyo Qaraxyada) |
Fiiro gaar ah: 1. Korontada ee tareenka korontada waa shaqo ikhtiyaari ah. Isticmaalayaashu waxay u baahan yihiin inay qeexaan qaabka korontada marka ay dalbanayaan. Fadlan tixraac lifaaqa bogga 101.
Ogaanshaha Khaladka Khadka
Isticmaalayaashu waxay dooran karaan dhinaca "ON" ee badhanka ee ku yaal xagga sare ee moduleka si ay u suurtageliyaan shaqada ogaanshaha cilladaha oo ay u muujiyaan qaylo-dhaan iyada oo loo marayo nalka LED-ka cas. Hadda gelitaanka goobta>7mA, qaylo-dhaan wareeg gaaban (SC); Hadda gelitaanka goobta
