Spɛsifikeshɔn dɛn

Input na eria we gɛt prɔblɛm

Input signal fɔ yuz

Switch kɔntakt/proksimiti switch dɛn

Di saplai vɔlɔt fɔ di sɛns

Na lɛk 8V

Switching rεt

≤5kHz we yu de yuz

Input/ɔtput kwaliti dɛn:

Na sayt input kɔrɛnt

>2.1mA, di autput de klos, we de sho se ON;
We

Input stet transishɔn ɛn alam switch:

We dial switch K1 de na "ON" sayd, di ɔtput stet de opɔsite di input stet.
We dial switch K1 de na "OFF" sayd, di ɔtput stet kin kɔnsistɛn wit di input stet.
We dial switch K2 de na "ON" sayd, di sɔrkwit de pik indikɛt rɛd layt LFD alam fɛnshɔn.
Di dial switch K3 ɛn K4 nɔ gɛt ɛni ifɛkt fɔ di tɛm.

Output in sef eria

Signal we de kɔmɔt na di ɔtput

Transistor (resistor), maksimal witstand vɔlɔt ≤ 30V DC

Di kwaliti dɛn we di autput gɛt

We di ekstenal pawa saplai vɔlɔt na 8V, di shɔt-sɔrkwit alam rɛsistɛns na ≤240Ω,
1- signal 1.4kΩ≤ rεsistεns ≤1.6kΩ, .
0- signal 13kΩ≤ rεsistεns ≤14kΩ, .
Open sirkit alarm resistans > 100kΩ

Besik paramita dɛn

Voltaj we di saplae de gi

20 ~ 35V DC we yu de yuz

Pawa we dɛn de yuz

≤30mA(24V pawa saplai, we di transistor de on)

LED indikɛtɔ fɔ di tin dɛn we de apin

Grin: Pawa indikɛtɔ
Yɔlɔ: Nɔmal wok stet
Rɛd: LFD indikashɔn, layn fɔlt alarm

Di paramita dɛn fɔ di tɛmpracha

Temperatur de wok: -20°C ~ +60°C,
Stɔrej tɛmpracha: -40°C ~ +80°C

Rilativ humiditi

10%~95% RH no kondensashɔn

Insuleshɔn trɛnk

Bitwin intrinsically sef sayd ɛn nɔ-intrinsically sef sayd (≥3000VAC/min)

Insuleshɔn rɛsistɛns

≥100MΩ (bitwin input/ɔtput/pawa saplai)

EMC we dɛn kɔl EMC

Akɔdin to IEC 61326-1 (GB/T 18268), IEC 61326-3-1

Di tin dɛn we dɛn nid fɔ du fɔ waya

Krɔs-sekshɔn ≥ 0.5mm2; Insuleshɔn trɛnk ≥ 500V

Di fil ikwipmɛnt dɛn we dɛn kin yuz

Fil ikwipmɛnt lɛk dray kɔntakt ɔ NAMUR tayp proksimiti switch input dɛn we de fala DIN19234 standad

Di ples we dɛn kin instɔl am

If dɛn instɔl am na say we sef, dɛn kin kɔnɛkt am to intrinsik sefty inschrumɛnt dɛn na say dɛn we gɛt prɔblɛm te to Zɔn 0, IIC, Zɔn 20, ɛn IIIC