- Terminal Board
- Makabukud a Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
0102030405
PHL-T-RJ11 Network SPD(Telephone network)
Pangunahing katangian
◑ Ing input ampo output ilapin deng 6P4C socket ampo RJ11 crystal head. Madali yang i-install, ala nang kailangang karagdagang accessories.
◑ Malyari yang gamitan para protektan ing LPZ0-LPZ2 ampo reng tutuking partition interfaces.
Technical data
Rated operating voltage Un | 110VAC |
Maximum operating voltage Uc | 132VAC |
Nominal working current IL | 250mA |
Nominal discharge current In (8 / 20μs) | 2.5kA |
Ing maximum discharge current (8 / 20μs) | 5kA |
Lightning impulse current limp(10/350μs) | 0.5kA |
Protection voltage Up (under In) line to line | <320V |
Protection voltage Up (under In) line to ground | <400V |
Bandwidth | 10MHz |
oras ning pakibat | <1ns |
Degrees ning proteksyun a binie ning enclosure (agpang keng IEC 60529) | IP 20 |
Materyal ning bale | Aluminium a kule kule |
Bilang da reng linya ning proteksyun | 2,3 |
Uri ning interface | RJ11 |
ing temperatura ning obra | —40~+80°C |
Paralan ning pamag-install | Optional DIN35mm rail mounting clamp |
Paralan ning pamag-ground | 1.5mm2, kaba 2000mm grounding wire |
pamantayan ning pamanyubuk | GB 8802.1/IEC 61643-1 |
Network SPD(Telephone network)

Schematic diagram

Dimension drawings














