- Ibhodi yeTheminali
- Iinqabo zokuphepha ezihlukanisiweko
- Iinsetjenziswa ezihlukanisako zesiginali
- Iinsetjenziswa zokuvikela ama-Surge
- Iinsetjenziswa zokuphepha
- Amamojula we-I/O ahlakaniphileko ahlukileko
- Amasango ahlakaniphileko
- Iinsetjenziswa ze-Optical Data yezebubulo
- Iinhlaziyi ze-Inthanethi ze-Dew Point
- Amamojula wokuthola idatha
- Umtjhugululi wedatha we-HART
PHG-11TF-27
Ukuhlolisisa
I-isolator yesiginali yokukhipha i-relay yokufaka yokutjhugulula itjhugulula isignali yokufaka yokuthintana kwe-switch nofana iswitjhi yokutjhidelana ibe yi-relay output ngokusebenzisa i-isolation. Ukutholwa kwephutha lomzila kwenziwa ngokuphuma kwe-relay ehlukileko begodu kutjengiswa mkhanyo we-LED phezulu kwemojuli. Iswitjhi yemodyuli isetjenziselwa ukukhetha isigaba sesiteshi nokuthi umsebenzi wokuthola iphutha lomlayini uyatlhogeka na.
Umkhiqizo lo udinga ukunikelwa amandla ngokuzijamela, begodu ukunikelwa kwamandla, ukungena nokukhipha amatheminali ahlukaniswe.
| Faka | |
| Isiginali yokufaka | Tjhugulula oxhumana nabo/ukutjhidela |
| Ivoltheji yokuphakela yesensa | Mayelana nama-8V |
| Izinga lokutjhugulula | |
| Iimfanelo zokufaka/zokukhipha: | |
| Ukufaka kwamanje okusesayithini | >2.1mA, okuphumako kuvaliwe, okutjengisa bona kuvuliwe; |
| Lokha naku | |
| Okukhiphako kuvamise ukuba "Vula"/"Vala" | Lokha iswitjhi yokudayela i-K1 isehlangothini elithi "VULWE", umphumela wokudlulisela uthi "Uvulekile ngokujayelekileko". |
| Ukulawula ukutjhugulula kokuthintana | Lokha iswitjhi yokudayela i-K1 iseceleni "OFF", umphumela wokudlulisela uthi "Ngokuvamileko uvaliwe". |
| Lokha iswitjhi yokudayela i-K2 isehlangothini elithi "ON", isekhethi ikhetha ukutjengisa umsebenzi we-alamu ye-LFD yokukhanya okubomvu. | |
| Umphumela | |
| Isiginali yokuphuma | Ukudlulisa nokudlulisa i-alamu (ngokuzikhethela) |
| Ikghono lokutjhayela | 250VAC/2A, 30VDC/2A umthwalo wokujamelana |
| Isikhathi sokuphendula | 20ms |
| Amapharamitha asisekelo | |
| Ivoltheji yokuphakela | 20~35VDC |
| Ukusetjenziswa kwamandla | |
| Isitjengiso se-LED | Okuluhlaza: Inkomba yamandla |
| Ophuzi: I-output relay isesimeni esijayelekileko sokusebenza | |
| Obomvu: Isitjengiso se-LFD, i-alamu yephutha lelayini | |
| Amapharamitha womtjhiso | Izinga lokutjhisa lokusebenza: -20°C ~ +60°C, |
| Izinga lokutjhisa lokugcina: -40°C ~ +80°C | |
| Umswakama ohlobene | 10%~95% RH akukho ukutjhisa |
| Amandla wokuvikela | ≥2000VAC/min (phakathi kokufaka/ukukhipha/ukuphakelwa kwamandla) |
| Ukujamelana nokuvikela | 100MΩ (500 V DC) (phakathi kokufaka/ukuphuma/ukunikelwa kwamandla) |
| Ukukhambisana kwe-elekthromagnethi | GB/T 18268(IEC 61326-3-1) |
| MTBF | 80000h |
| Iimfuneko zeentambo | Isigaba esiphambanweni ≥ 0.5mm2; Amandla wokuvikela ≥ 500V |
| Iinsetjenziswa ezisebenzako | Iinsetjenziswa zesimini ezifana nama-dry contacts nofana i-NAMUR yohlobo lokutjhidelana kweswitshi ehambisana nezinga le-DIN19234 |
Qaphela: Ukuphakelwa kwamandla wesitimela samandla kungumsebenzi ongakhetha kiwo. Abasebenzisi kufuze batjho indlela yokuphakelwa kwamandla lokha naba-oda. Sibawa uqale ukunamathiselwa ekhasini 89.
Ukutholwa kwephutha lelayini(LFD)
Abasebenzisi bangakhetha ihlangothi elithi "VULA" leswitshi phezulu kwemojuli ukuvumela umsebenzi wokuthola amaphutha begodu batjengise i-alamu ngokukhanya okubomvu kwe-LED. Umtjhini wokufakwa endaweni>7mA, i-alamu yesekhethi emfitjhani (SC); Umtjhini wokufaka wendawo
