Ukufaka amazinga womtjhiso
- Ibhodi yeTheminali
- Iinqabo zokuphepha ezihlukanisiweko
- Iinsetjenziswa ezihlukanisako zesiginali
- Iinsetjenziswa zokuvikela ama-Surge
- Iinsetjenziswa zokuphepha
- Amamojula we-I/O ahlakaniphileko ahlukileko
- Amasango ahlakaniphileko
- Iinsetjenziswa ze-Optical Data yezebubulo
- Iinhlaziyi ze-Inthanethi ze-Dew Point
- Amamojula wokuthola idatha
- Umtjhugululi wedatha we-HART
PHD-11TZ-*1+ /PHD-12TZ-*11+
Ukuhlolisisa
Isivimbelo sokuphepha sokufaka se-RTD esinomsebenzi wokuvikela ama-surge singatjhugulula amatshwayo we-thermistor (RTD) weentambo ezimbili nofana ezintathu eendaweni eziyingozi abe matshwayo wamanje we-4-20mA bese uwakhipha endaweni ephephileko. Ingahlelwa ngokuhlakanipha, begodu ububanzi bamambala bokujamelana nokutjhisa bungasethwa ngesofthiwe yekhomphyutha. Inemisebenzi ye-alamu yokuphuka kwentambo kanye ne-alamu engaphandle kwebanga.
Umkhiqizo lo udinga ukuphakelwa kwamandla okuzijameleko, okuphakelwa kwamandla okuhlukileko, ukungena, nokukhipha amatheminali.
"*" imelela umhlobo wokufaka we-thermistor, begodu imodeli ethileko imelelwa yikhodi (qala "Umhlobo weSiginali yokufaka kanye nethebula lebanga" ukuthola imininingwana).
| Imihlobo yesiginali yokufaka kanye nebanga lokulinganisa | ||||
| Ikhodi | Imodeli ye-RTD | Ibanga lokulinganisa | Ibanga eliphasi | Ukunemba kokutjhugulula |
| 1 | G53 | -50~150°C | 20°C | 0.2°C/0.1% |
| 2 | Cu50 | -50~150°C | 20°C | 0.2°C/0.1% |
| 4 | I-Pt100 | -200~850°C | 20°C | 0.2°C/0.1% |
| 6 | Pt1000 | -200~850°C | 20°C | 0.2°C/0.1% |
| 7 | Ni1000 | -60~250°C | 20°C | 0.2°C/0.1% |
| Ukufaka endaweni eyingozi | |
| Isiginali yokufaka | Amatshwayo we-thermistor yeentambo ezimbili nofana ezintathu (qala "Umhlobo weSiginali yokufaka kanye nethebula lebanga" ukuthola imininingwana) |
| Ukuvalwa kokufaka | "I-alamu ephasi" engatjhugululwa ibe "yi-alamu ephezulu" ngesofthiwe yokuhlela |
| Ibanga lesiginali | Ububanzi bokulinganisa obuhambisanako bokujamelana nokutjhisa |
| Ibanga lokulinganisa | Abasebenzisi benza ukuhlelwa kwabo lokha naba-oda, begodu bakutjengise kunomboro yomsila nofana ngenye indlela. |
| Umphumela wehlangothi lokuphepha: | |
| Isiginali yokuphuma | 4~20mA |
| Umthamo wokuthwala | 0~500Ω(ungenziwa ngokwezifiso) |
| Iimfanelo zokuvikela ukutjhinga: | |
| I-Nominal discharge current ln(8/20μs) | 5kA |
| Izinga lokuvikelwa kwevoltheji Phezulu (8/20μs): | 60V(umugqa ukuya emgqeni) |
| Izinga lokuvikelwa kwevoltheji Phezulu (8/20μs): | 600V(ilayini ukuya phasi) |
| Ngokuya ngamazinga | GB/T18802.21-2016(okulingana ne-1EC61643-21:2012) |
| Isitjengiso se-LED | Okuluhlaza: Inkomba yamandla |
| I-alamu yebanga eliphasi ikhanyisiwe, i-alamu yebanga eliphezulu ikhanya obomvu | |
| Ukunemba kokuphuma | Sibawa uqale "Uhlobo lwesiginali yokufaka kanye nethebula lebanga" ukuthola imininingwana |
| Isikhathi sokuphendula | Ukufikelela ku-90% wenani lokugcina ngaphakathi kwama-300ms |
| Ukutjhuguluka kwamazinga womtjhiso | 0.005%FS/°C |
| Amapharamitha womtjhiso | Izinga lokutjhisa lokusebenza: -20°C~+60°C, izinga lokutjhisa lokugcina:-40°C~+80°C |
| Umswakama ohlobene | 10%~95% RH akukho ukutjhisa |
| Amandla we-dielectric | Phakathi kwehlangothi eliphephileko nelingaphephileko (≥ 3000VAC/min); |
| hlangana nokuphakelwa kwamandla netheminali engaphephiko (≥ 1500VAC/min) | |
| Ukujamelana nokuvikela | ≥100MΩ (phakathi kokufaka/ukukhipha/ukuphakelwa kwamandla) |
| Ukukhambisana kwe-elekthromagnethi | Ngokuya nge-IEC 61326-1(GB/T 18268), i-IEC 61326-3-1 |
| MTBF | 100000h |
| Iimfuneko zeentambo | Isigaba esiphambanweni ≥ 0.5mm2; Amandla wokuvikela ≥ 500V |
| Iinsetjenziswa ezisebenzako | Iintambo ezimbili nofana iintambo ezintathu |
| G53, Cu50, Pt100, Pt1000, Ni1000 | |
| Indawo yokufaka | Ifakwe endaweni ephephileko, ingahlanganiswa namathulusi wokuphepha wangaphakathi eendaweni eziyingozi ukuya ku-Zone 0, IIC, Zone 20, kanye ne-IIIC |
| Isitifiketi sokuphepha | |
| Iphawu lokuvikela ukuqhuma | [Ex ia Ga]lIC [Ex ia Da]lllC |
| Izinga elivikela ukuqhuma | GB/T3836.1-2021 GB/T3836.4-2021 |
| Amatheminali 4-6、5-6 | Um:250V AC/DC Uo=8.4V DC lo=31mA |
| Po=65.1mW Co=4.8μF Lo=20mH | |
| Umzimba wesitifiketi | I-CQST (i-China National Quality Supervision and Test Center of Explosion Protected Electrical Products) |
| Isentha yokuhlola imikhiqizo yokuvikela umbani ye-Shanghai | |
Qaphela: 1. I-PHD-11TZ - * 1+ ayifaki ingcenye yokukhipha 2
2. Umsebenzi we-power rail ngumsebenzi ongakhetha kiwo, begodu abasebenzisi kufuze bacacise indlela yokuphakelwa kwamandla lokha nawufaka i-oda
Ukukhethwa kwezixhumanisi zesitimela samandla kungabhekisa ekhasini 89 le "Isithasiselo"
3. Lokha nawufaka i-RTD yeentambo ezintathu, kuyatlhogeka bona uqinisekise bona iintambo ezintathu iintambo zinobude obulinganako ngendlela ekungakghoneka ngayo
4. Lokha nawufaka i-RTD eneentambo ezimbili, amatheminali wokuvikela 4 no-2 kufanele abe isekhethi emfitjhani
PHD-11TC-33A-23
PHD-11TZ-X1+ PHD-12TZ-X11+