- Ibhodi yeTheminali
- Iinqabo zokuphepha ezihlukanisiweko
- Iinsetjenziswa ezihlukanisako zesiginali
- Iinsetjenziswa zokuvikela ama-Surge
- Iinsetjenziswa zokuphepha
- Amamojula we-I/O ahlakaniphileko ahlukileko
- Amasango ahlakaniphileko
- Iinsetjenziswa ze-Optical Data yezebubulo
- Iinhlaziyi ze-Inthanethi ze-Dew Point
- Amamojula wokuthola idatha
- Umtjhugululi wedatha we-HART
PHD-11TF-27+
Ukuhlolisisa
Isithiyo sokuphepha esihlukanisiweko esinomsebenzi wokuvikela ukutjhinga kwemiphumela yokudluliselwa kweswitjhi, esihlukanisa begodu sidlulisele amatshwayo wokufaka avela ebantwini beswitjhi nofana amaswitshi aseduze eendaweni eziyingozi ukuya endaweni yokuphepha ene-output relay ngokusebenzisa isithiyo sokuphepha. Ukutholwa kwephutha lelayini kwenziwa ngokusebenzisa umphumela ohlukileko begodu kutjengiswa ku-LED ephezulu yemojuli. Iswitjhi yokudayela yemodyuli isetjenziselwa ukusetha ukufaka nokukhipha ngaphakathi kwesigaba nofana ukulawula okubuyela emuva, kanye nokuvumela nofana ukuvala umsebenzi wokutjengisa i-alamu yokuthola amaphutha welayini.
Umkhiqizo lo udinga ukuphakelwa kwamandla okuzijameleko, okuphakelwa kwamandla okuhlukileko, ukungena, nokukhipha amatheminali.
| Ukufaka endaweni eyingozi | |
| Isiginali yokufaka | Tjhugulula oxhumana nabo/ukutjhidela |
| Ivoltheji yokuphakela yesensa | Mayelana nama-8V |
| Izinga lokutjhugulula | |
| Iimfanelo zokufaka/zokukhipha: | |
| Ukufaka kwamanje okusesayithini | >2.1mA, okuphumako kuvaliwe, okutjengisa bona kuvuliwe; Lokha naku |
| Okukhiphako kuvamise ukuba "Vula"/"Vala" ukulawula ukutjhugulula kokuthintana: | Lokha iswitjhi yokudayela i-K1 isehlangothini "eliVULWEKO", umphumela wokudlulisa "Ngokuvamise ukuvala". Lokha iswitjhi yokudayela i-K1 iseceleni "OFF", umphumela wokudlulisela "Ngokuvamileko kuvulekile". Lokha iswitjhi yokudayela i-K2 isehlangothini elithi "ON", isekhethi ikhetha okutjengisa umsebenzi we-alamu ye-LFD yokukhanya okubomvu. |
| Umphumela endaweni ephephileko | |
| Isiginali yokuphuma | Ukudlulisa nokudlulisa i-alamu (ngokuzikhethela) |
| Umthamo wokutjhayela | 250VAC/2A,30VDC/2A lokha nayibekwa ngaphasi kwemithwalo ejamelanako |
| Isikhathi sokuphendula | 20ms |
| Iimfanelo zokuvikela ukutjhinga: | |
| I-Nominal discharge current ln(8/20μs) | 5kA |
| Izinga lokuvikelwa kwevoltheji Phezulu (8/20μs): | 60V(umugqa ukuya emgqeni) |
| Izinga lokuvikelwa kwevoltheji Phezulu (8/20μs): | 600V(ilayini ukuya phasi) |
| Ngokuya ngamazinga | GB/T18802.21-2016(okulingana ne-1EC61643-21:2012) |
| Amapharamitha asisekelo | |
| Ivoltheji yokuphakela | 20~35VDC |
| Ukusetjenziswa kwamandla | |
| Isitjengiso se-LED | Okuluhlaza: Inkomba yamandla Ophuzi: I-relay yokukhipha isebujameni obujayelekileko bokusebenza Obomvu: Inkomba ye-LFD, i-alamu yephutha lelayini |
| Amapharamitha womtjhiso | Izinga lokutjhisa lokusebenza: -20°C ~ +60°C, Izinga lokutjhisa lokugcina: -40°C ~ +80°C |
| Umswakama ohlobene | 10%~95% RH akukho ukutjhisa |
| Amandla wokuvikela | Phakathi kwehlangothi eliphephileko nelingaphephileko (≥3000VAC/min); hlangana nokuphakelwa kwamandla nehlangothi elingaphephiko (≥1500VAC/min) |
| Ukujamelana nokuvikela | 100MΩ(500V DC) (phakathi kokufaka/ukuphuma/ukuphakelwa kwamandla) |
| Ukukhambisana kwe-elekthromagnethi | GB/T 18268 (IEC 61326-1) |
| MTBF | 80000h |
| Iimfuneko zeentambo | Isigaba esiphambanweni ≥ 0.5mm2; Amandla wokuvikela ≥ 500V |
| Iinsetjenziswa ezisebenzako | Iinsetjenziswa zesimini ezifana nama-dry contacts nofana i-NAMUR yohlobo lokutjhidelana kweswitshi ehambisana nezinga le-DIN19234 |
Qaphela: Ukuphakelwa kwamandla wesitimela samandla kungumsebenzi ongakhetha kiwo. Abasebenzisi kufuze tjho indlela yokuphakelwa kwamandla lokha nawu-oda. Sibawa uqale ukunamathiselwa ekhasini 89.
Ukutholwa kwephutha lelayini(LFD)
Abasebenzisi bangakhetha ihlangothi elithi "VULA" leswitshi phezulu kwemodyuli ukuvumela umsebenzi wokuthola amaphutha begodu utjengise i-alamu nge- isibani esibomvu se-LED. Umtjhini wokufakwa endaweni>7mA, i-alamu yesekhethi emfitjhani (SC); Umtjhini wokufaka wendawo ukufaka kokuthintana kutlhoga umsebenzi wokuthola amaphutha (ukuphuka kwentambo, okufitjhani isekhethi), i-resistor ye-22k Ω kufanele ixhunywe ngokufana emaphethelweni womabili ye-switch, begodu i-resistor engu-680 Ω kufanele ixhunywe ngokulandelana (njengombana kutjengiswa emfanekisweni wokufaka iintambo wokuthintana kweswitjhi II).
