Analog Output a ni
- Terminal Board-ah hian a awm a
- Hriselna atana harsatna awmte
- Signal Isolators te pawh a awm
- Surge laka invenna hmanrua te
- Safety Relay te a awm bawk
- Intelligent I/O Module hrang hrang awmte
- Gateways fing tak tak te
- Industrial Data Optical Transceiver hmanga siam a ni
- Online hmanga Dew Point thlirletna
- Data lakkhawmna Modules te
- HART data converter a ni
01 a ni02 a ni03 a ni04 a ni05 a ni
PHC-11TD-11+ hmanga siam a ni
A tlangpuiin
Surge protection function nei analog output isolated safety barrier hian safe area-a instruments atanga hazardous area-a isolated transmission 4~20mA transmission chu a realize thei a, valve positioner, electric/pneumatic converter leh hmanraw dangte chu a hmunah a khalh thei a, wirebreak alarm function hmanga HART digital signals bidirectional transmission pawh a support thei bawk. He product hian independent power supply a mamawh a, power supply, input leh output te chu isolated a ni.
A chiang zawk
| A hmun him lo input rawh | |
| Signal input a ni | 4~20mA (HART digital signal) a ni. |
| Output chu hmun hlauhawm takah a awm | |
| A chhuahna signal a ni | 4~20 mA(HART digital signal) a ni. |
| Load resistance a awm thei | 20mA output a nih chuan, 0~500 Ω (customizable) a ni. |
| A chhuahna tur current nominal ln(8/20μs) . | 5kA a ni |
| Voltage venhimna level Up(8/20μs): | 60V(line atanga line thleng) |
| Voltage venhimna level Up(8/20μs): | 600V(line atanga lei thleng) |
| Standard angin | GB/T18802.21-2016(1EC61643-21:2012 nen a inang) |
| Parameter bulpui ber berte | |
| Supply voltage a awm | 20~35VDC a ni |
| Power hmanralna a ni | ≤50mA(24V power supply, 20mA chhuahna) a ni. |
| LED hmanga entir a ni | Green: power chhinchhiahna a ni |
| Output dik tak a ni | 0.1%FS (A hlutna tlangpui: 0.05%FS) a ni. |
| Chhanna hun pek hun | 2ms chhungin final value 90% a thleng thei |
| Temperature a inthlak danglam thin | 0.005% FS/°C a ni |
| Temperature parameter hrang hrangte | Hnathawh lumna: -20°C ~ +60°C, A dahna hmun: -40°C ~ +80°C |
| Relative humidity a awm lo | 10%~95% RH ah chuan condensation a awm lo |
| Insulation chakna a ni | Intrinsically safe side leh non-intrinsically safe side (≥3000VAC/min) inkar; power supply leh non-intrinsically safe side (≥1500VAC/min) inkar a ni. |
| Insulation a do theih loh | ≥100MΩ (input/output/power supply inkar) a ni. |
| Electromagnetic nena inmil theihna | IEC 61326-1 (GB/T 18268) ang chuan IEC 61326-3-1 |
| MTBF | 100000h a ni |
| Wire mamawh a ni | Cross section ≥ 0.5mm2 a ni a; Insulation chakna ≥ 500V a ni |
| Field hmanrua hman tur | Valve zawngtu, electric/pneumatic converter hmanga siam a ni |
| Installation hmun a ni | Safe zone-a dah a nih chuan Zone 0, IIC, Zone 20, leh IIIC thlenga hmun hlauhawma intrinsic safety instrument-te nen a inzawm thei a ni |
| Intrinsically him tak certification pek a ni | |
| Explosion proof chhinchhiahna | [Ex ia Ga]lIC [Ex ia Da]lllC |
| Puak thei lo standard a ni | GB/T3836.1-2021 GB/T3836.4-2021 a ni |
| Terminal 3-4 thleng a awm | Um:250V AC/DC Uo=28V DC lo=93mA a ni Po=0.65W Co=0.083μF Lo=4.2mH a ni |
| Certification siamtu pawl a ni | CQST(China National Quality Supervision leh Explosion Protected Electrical Products te enfiahna hmun) Shanghai-a lightning laka invenna hmanrua test-na hmunpui a ni |
Dimension a ni
Schematic Drawings te pawh a awm bawk
Note: Power rail function hi optional function a ni a, users te chuan an specify a ngai a niorder siam huna power supply hman dan
Power rail connector thlan dan tur chu "Annex" phek 89-ah en theih a ni.
PHC-11TD-11+ hmanga siam a ni
