Power Surge laka invenna hmanrua te
- Terminal Board-ah hian a awm a
- Hriselna atana harsatna awmte
- Signal Isolators te pawh a awm
- Surge laka invenna hmanrua te
- Safety Relay te a awm bawk
- Intelligent I/O Module hrang hrang awmte
- Gateways fing tak tak te
- Industrial Data Optical Transceiver hmanga siam a ni
- Online hmanga Dew Point thlirletna
- Data lakkhawmna Modules te
- HART data converter a ni
01 a ni02 a ni03 a ni04 a ni05 a ni
PHL-TA-1000PA hmanga siam a ni
PRODUCT THIL AWM DAN THIL AWM DAN
Secondary photovoltaic DC surge protector hi solar photovoltaic system combiner box chhunga DC photovoltaic power venhimna atana siam bik a ni. A hnathawh ber chu photovoltaic system-a surge emaw electromagnetic interference avanga hmanrua tihchhiat emaw, a hnathawh that loh emaw ven a ni.
Hetiang protector chi hian testing standard kaihhnawih a zawm tlangpui a, i sawi ang khan EN 5053911 leh GB/18802-31 te hi a ni. Heng standard-te hian protector-te’n surges leh surges-te nghawng laka photovoltaic system-te ṭha taka an humhim theih nan technical requirements leh performance indicator-te a tarlang a ni.
A ziarang ber berte
1. Complete pre wiring base: Hei hian a awmzia chu protector-ah hian pre wiring base dah a ni a, hei hian photovoltaic system-a dah a awlsam phah a ni. He design hian photovoltaic system-a wiring hman dan bik a ngaihtuah a, installation atan awlsamna a pe a ni.
2. Y-shaped connection method: Y-shaped connection method hman hian generator circuit-a insulation chhiat avanga lightning arrester tihchhiat a awm loh nan. Hetiang connection method hian system stability leh rintlakna a ti tha thei a, insulation fault avanga hlauhawm awm thei te chu a ti tlem thei a ni.
3. Special anti DC arc device: He feature hian arc avanga accident lo awm lo turin a tum a ni. DC arc hian photovoltaic system-ah himna lama harsatna lian tak a thlen thei a, chuvangin arc lo awm tur venna atan special device hman a ni a, chu chuan system himna a ti tha zawk a ni.
SPECIFICATIONS THIL AWM DAN
| Technical parameter hrang hrang a awm bawk | PHL-TA-1000PV hmanga siam a ni | PHL-TA-1500PV hmanga siam a ni |
| Operating voltage sang ber a ni | 1000V a ni | 1500V a ni |
| Nominal discharge current a awm bawk | 20kA a ni | 20kA a ni |
| Discharge current sang ber ln(8/20μs) a ni. | 40kA a ni | 40kA a ni |
| A venhimna voltage Up (In blew) a ni. | ||
| Chhanna hun pek hun | 25nS a ni | 25nS a ni |
| Kum upa lam thermal separation hnathawh | Awle | Awle |
| Kum upa lam chhinchhiahna hnathawh | yes (indicator window chu green atanga red ah a inthlak) | yes (indicator window chu green atanga red ah a inthlak) |
| Hnathawh tur temperature range | -40-+80"C vel a ni | -40-+80"C vel a ni |
| Tele-signalization hmanga hnathawh a ni | duh zawk thlang | duh zawk thlang |
| RS485 hmanga inbiakpawhna | duh zawk thlang | duh zawk thlang |
| Wire inzawmkhawmna hmun cross-sectional area | 1.5-2.5mm2 vel a ni | 1.5-2.5mm2 vel a ni |
| Install dan tur | DIN35mm rel a ni | DIN35mm rel a ni |
| Enclosure hmanrua a ni | UL94-VO a ni | UL94-VO a ni |
| Protection grades te pawh a awm bawk | IP20 a ni | IP20 a ni |
| Test standard a ni | GB/T 18802.31/EN50539-11 ah a awm bawk | GB/T 18802.31/EN50539-11 ah a awm bawk |
Diagram hmanga siam a ni
Model number-a "*" hian thread specification a entir a, chu chu order hunah tarlan tur a ni: I:M20X1.5 N:1/2”NPT G:G1/2”
Schematic diagram hmanga siam a ni
Dimension hmanga lemziak te
