PHG-11TT+/ PHG-12TT+

Surge protɛkshɔn tayp TC input tɛmpracha kɔnvɔta

PHG-11TT+ 1 input 1 ɔtput
PHG-12TT+ 1 input 2 autput dɛn

Input :TC signal we yu de yuz

Output :DC signal (kɔrɛnt/vɔltɛm) .

Kɔntakt wi

di ditel dɛn bɔt di prɔdak

Ovaviu fɔ di tin dɛn we dɛn dɔn lan

Tɛmokɔpl input tɛmpracha kɔnvɔta wit sɔj protɛkshɔn fɛnshɔn kin aysol ɛn kɔnvɔyt tɛmkɔpl (TC) DC signal dɛn to kɔrɛnt signal dɛn. Dis tempɔret kɔnvɔta gɛt bilt-in kol ɛnd kɔmpɛnshɔn ɛn dɛn kin kɔnfigyut am wit sɛns. Di aktual rεnj fכ di tεmכkכpl kin set tru kכmpyuta softwe. I gɛt di wok dɛn we waya brok alam ɛn ɔt ɔf rɛnj alam.

Dis prodak nid indipɛndɛnt pawa saplai, wit isol pawa saplai, input, ɛn ɔtput tɛminal dɛn.

Spɛsifikeshɔn dɛn

Input we dɛn put insay
Input signal fɔ yuz	K, S, E, J, B, T, R, N tεmכkכpl signal dεm (luk "Input Signal Tayp εn Rεnj Tεbul" fכ di ditel dεm)
Input diskɔnekshɔn	Di difɔlt "lɔ alam" kin chenj to "hay alam" tru kɔnfigyushɔn sɔftwɛl
Signal rεnj	Di mεzhɔ rεnj כf di kכrεspכndεnt tεmכkכpl na -10~100mV.
Di rεnj fɔ mɛzhɔ	Di wan dɛn we de yuz am kin mek dɛn yon kɔnfigyushɔn we dɛn de ɔda, ɛn sho am na di tel nɔmba ɔ ɔda we.
Bil-in kol kɔmpɛnshɔn	±1 ° C(Kɔmpɛns rɛnj -20 ° C ~ + 60 ° C)
Di tin we dɛn kin du: .
Signal we de kɔmɔt na di ɔtput	DC signal (kɔrɛnt/vɔltɛm) .
Awtput lod kapasiti	Kɔrɛnt lod rɛsistɛns ≤500Ω (kɔstɔmayz) Voltaj lod resistans
Di tin dɛn we de mek pɔsin nɔ gɛt sɔj:
Nominal dischaj kɔrɛnt ln(8/20μs) .	5kA we yu de yuz
Vɔltɛm protɛkshɔn lɛvɛl Up(8/20μs): .	60V(layn to layn)
Vɔltɛm protɛkshɔn lɛvɛl Up(8/20μs): .	600V(layn to grɔn)
Akɔdin to di standad dɛn	GB/T18802.21-2016(ikwal to 1EC61643-21:2012)
Voltaj we di saplae de gi	20-35VDC we yu de yuz
Pawa we dɛn de yuz	Kɔrɛnt autput Kɔrɛnt autput
LED indikɛtɔ fɔ di tin dɛn we de apin	Grin: Pawa indikɛtɔ Low renj alarm L1 layt on, ay renj alarm L2 layt on
Ɔtput akkuracy	Duya luk na di "Input Signal Type and Range Table" fɔ di ditel dɛn
Di tɛm fɔ ansa	fכ rich 90% pan di fayn valyu insay 300ms
Tɛmpratura drift	0.005%FS/°C
Di paramita dɛn fɔ di tɛmpracha	Wok temperechur: -20 ° C ~ + 60 ° C, stכrej tεmprachכ:-40 ° C ~ + 80 ° C
Rilativ humiditi	10%~95% RH no kondensashɔn
Insuleshɔn trɛnk	≥2000VAC/min (bitwin input/ɔtput/pawa saplai)
Insuleshɔn rɛsistɛns	100MΩ(500V DC) (bitwin input/ɔtput/pawa saplai)
Ilɛktromagnetik kɔmpatibiliti	GB/T 18268 (IEC 61326-1) Di wan dɛn we de wok fɔ di gɔvmɛnt.
MTBF	800000h
Di tin dɛn we dɛn nid fɔ du fɔ waya	Krɔs sɛkshɔn ≥ 0.5mm2; Insuleshɔn trɛnk ≥ 500V
Di fil ikwipmɛnt dɛn we dɛn kin yuz	K. S, E, J, B, T, R, N TC sensor dɛn

Dimenshɔn fɔ di pɔsin

PHG-11TT+.jpg we de sho aw fɔ du am

Skematik dayagram

PHG-11TT+(1).jpg

Not:

1. PGH-11TT+nɔ inklud ɔtput pat 2

2. Di pawa rel fɛnshɔn na opshɔnal fɛnshɔn, ɛn di wan dɛn we de yuz am nid fɔ spɛsifa di pawa saplai we dɛn de mek ɔda

Di selekshɔn fɔ pawa rel kɔnɛkta dɛn kin rifer to pej 89 na di "Annex".

Spɛsifikeshɔn, mɔdel ɛn kɔd

Input signal tayp ɛn mɛzhɔmɛnt rɛnj
Kɔd	TC mɔdel	Di rεnj fɔ mɛzhɔ	Minimum rεnj	Kɔnvɔshɔn kɔrɛkt we
1. 1. 1.	K	-200 ~ 1370 ° C	50°C	0,5°C/0,1% na di .
2. 2.	S	-50 ~ 1760 ° C	500°C na di ples	1,5°C/0,1% pan di .
3. 3.	ƐN	-140 ~ 1000 ° C	50°C	0,5°C/0,1% na di .
4. 4.	J	-160 ~ 1200 ° C	50°C	0,5°C/0,1% na di .
5. 5.	B	250 ~ 1800 ° C	500°C na di ples	1,5°C/0,1% pan di .
6. 6.	T	-200 ~ 400 ° C	50°C	0,5°C/0,1% na di .
7. 7.	R	-50 ~ 1760 ° C	500°C na di ples	1,5°C/0,1% pan di .
8. 8.	N	-200 ~ 1300 ° C	50°C	0,5°C/0,1% na di .

Ɔtput paramita difinishɔn
Kɔd	Paramita
1. 1. 1.	4 ~ 20mA we yu de
2. 2.	0 ~ 20mA we yu de
3. 3.	0 ~ 5V we yu de
4. 4.	0 ~ 10V we yu de
5. 5.	1 ~ 5V we yu de
6. 6.	0 ~ 75mV we yu de yuz
7. 7.	Di wɔl 10V
8. 8.	Dɛn mek am fɔ yusɛf

PHG-11TT+ (2) .jpg

Fɔ ɛgzampul: wan input ɛn tu autput, thermocouple K (-200 ~ 1370 ° C) input, tu 4 ~ 20mA autput, 24V pawa saplai, mɔdel: PHG-12TT-111+

PH-Co siris RS422 Kontrol Net bus data optik...