Analog Input
- Terminal Board
- Jam gwoko kwo ma juketho kende
- Jam poko lanyuth
- Jam tic mi gwoko kwo pa dhanu
- Relays mi gwoko kwo
- I/O Modules ma rieko ma jupoko
- Dhugola ma rieko
- Jam tic ma tiyo ku mac
- Dew Point Analyzers mi intanet
- Module mi nwangu lembe
- HART data converter
PHG-22TE series
Neno wi lembe
Analog input signal isolator copo poko man loko waya aryo nyo adek 4~20mA nyo current source signals ni current nyoke voltage signal output. Piny ma jucwalo man ma juwodho copo bedu nimakere ku yeny pa jumatiyo kudu.
Piny eni mitu kero ma tiye kende, kero, input man output terminals jupoko ikindgi.
| Keth | |
| Lanyuth mi ketho | Waya aryo nyo adek 4~20mA nyo signal ma kawoni |
| Voltage mi poko | ≥18V |
| Gwoko piny ma iye | ≤100Ω |
| Adwogi | |
| Lanyuth mawok | DC signal(current/voltage) |
| Gwoko peko | Current load resistance ≤500Ω Voltage load resistance |
| Piny ma pire tek | |
| Voltage mi mio | 20~35V DC |
| Tiyu ku mac | Adwogi ma kawoni |
| LED ma nyutho | Green: lanyuth pa kero |
| Ber pa adwogi | 0.1%FS (Typical value: 0.05%FS) |
| Saa mi dwoko wang lembe | 5ms ni tuko 90% pa wel ma tok cen |
| Piny ma mako lyethu | Lieth mi tic: -20°C ~ +60°C, Lieth mi kano piny: -40°C ~ +80°C |
| Piny ma ngic | 10%~95% RH epe ku pii |
| Teko mi gwoko piny | ≥2000VAC/min (mondo/woko/miyo kero) |
| Teko pa lyethu | 100MΩ (500V DC) (i kind piny ma wok/wok woko/mio teko) |
| Ber pa mac | GB/T 18268 (IEC 61326-1) |
| MTBF | 80000h |
| Piny ma mitere pi waya | The cross section≥ 0.5mm2; Teko pa lyethu ≥ 500V |
| Jam tic mi poto ma tiyo | Jam cwalu waya aryo nyo adek nyoke source mi mac |
Poi: Tic pa power rail utiye tic ma jutimo, man jutic umitu gi nyuth yore mi mio mac ka gi ketho wil. Yero pa power rail connectors copo nen i pot karatasi mir 89 mi "Annex"
PHG-22TE series
PHG-22TE series