- Terminal Board
- Jam gwoko kwo ma juketho kende
- Jam poko lanyuth
- Jam tic mi gwoko kwo pa dhanu
- Relays mi gwoko kwo
- I/O Modules ma rieko ma jupoko
- Dhugola ma rieko
- Jam tic ma tiyo ku mac
- Dew Point Analyzers mi intanet
- Module mi nwangu lembe
- HART data converter
PHG-11TD Series
Neno wi lembe
PHG-11TD series analog input (output) signal isolator copo poko man
loko current nyo voltage signals ni current nyo voltage signals output.
Lembe ma juketho i iye man ma juwodho copo bedu nimakere ku
yeny pa jatic.
Piny eni mitu ebed ku kero kende, man kero,
kabedo mi donjo man mi wok woko gipokere.
Lembe ma pire tek |
|
Keth |
|
Lanyuth mi ketho | DC signal(current/voltage) |
Gwoko piny ma iye | Kit kero pa mac ≥100kΩ |
Adwogi |
|
Lanyuth mawok | DC signal(current/voltage) |
Gwoko peko | Pek pa tic ma kawoni ≤500Ω |
Piny ma pire tek |
|
Voltage mi mio | 20~35VDC |
Tiyu ku mac | Adwogi ma kawoni |
LED ma nyutho | Green: lanyuth pa kero |
Ber pa adwogi | 0.1%FS (Typical value: 0.05%FS) |
Saa mi dwoko wang lembe | 5ms ni tuko 90% pa wel ma tok cen |
Piny ma mako lyethu | Liet pa tic: -20°C ~ +60°C, |
Piny ma ngic | 10%~95% RH epe ku pii |
Teko mi gwoko piny | ≥2000VAC/min (mondo/woko/miyo kero) |
Teko pa lyethu | ≥100MΩ (500V DC) (i kind piny ma wok/wok woko/mio teko) |
Ber pa mac | GB/T 18268 (IEC 61326-1) |
MTBF | 80000h |
Piny ma mitere pi waya | The cross section≥ 0.5mm2; Teko pa lyethu ≥ 500V |
Jam tic mi poto ma tiyo | Ka ma kawoni uai i iye, ka ma voltage uai i iye; kabedo pa valve, jam loko mac |
Nyuthu piny
