Temperature Signal Input
- Terminal Board
- Makabukud a Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PHG-11TZ series PHG-12TZ series
Overview
Ing RTD input temperature transmitter malyari yang mag-isolate ampo mag-convert keng thermal resistor (RTD) signal keng DC signal, na gagamitan para mag-drive keng load. Ing intelligent configuration malyari ya, at ing tutuking range ning thermal resistance malyari yang i-set kapamilatan ning computer software. Atin yang function ning disconnection alarm ampo out-of-range alarm function.
Ing produktung ini kailangan yang magsarili, at ing power supply, input ampo output terminals makabukud la.
| Input | |
| Input signal | Adwa o atlung kawad a thermistor signals (lawen ya ing "Input Signal Type and Range Table" para kareng detalye) |
| Input disconnection | Ing default a "low alarm" malyari yang i-modify keng "high alarm" kapamilatan ning configuration software |
| Signal range | Ing katumbas a sukad ning thermal resistance |
| Sukat ning sukad | Deng gagamit gagawan da ing karelang sariling configuration neng mag-order la, at ipabalu da iti keng tail number o aliwa pa. |
| Excitation current | 800μA |
| Output: | |
| Output signal | DC signal (current/voltage) |
| Kapasidad ning karga | Ing kasalukuyan a resistensya ning karga ≤500Ω (malyaring ipasadya) Voltage load resistance |
| Basic parameters: | |
| Supply voltage | 20-35VDC |
| Pamangamit king kuryenti | Kasalukuyan a output
kasalukuyan a output
|
| LED indicator | Green: Power indicator Low range alarm L1 light on, high range alarm L2 light on |
| Katuliran ning pamaglual | Paki-refer me ing "Input Signal Type and Range Table" para kareng detalye |
| oras ning pakibat | miras keng 90% ning tauling ulaga kilub ning 300ms |
| Ing pamagbayu ning temperatura | 0.005%FS/°C |
| Parameters ning temperatura | Temperatura ning obra: -20°C~+60°C, temperatura ning pamitipun:-40°C~+80°C |
| Relatibung humidity | 10%~95% RH alang condensation |
| Dielectric strength | ≥2000VAC/min (pilatan ning input/output/power supply) |
| Insulation resistance | 100MΩ(500VDC )(pilatan ning input/output/power supply) |
| Electromagnetic compatibility | GB/T 18268(IEC 61326-1) |
| MTBF | 800000h |
| kailangan ing kawad | Cross-section ≥0.5mm2; Insulation strength ≥ 500V |
| Applicable field equipments | Adwang kawad o atlung thermistor G53, Cu50, Pt100, Pt1000, Ni1000 |
Tandanan: 1. PHG-11TZ - * 1 e ya kayabe ing output part 2 2. Ing power rail function metung yang optional a function, at kailangan lang i-specify deng gagamit ing paralan ning power supply nung mag-order la. anggang malyari 4. Potang mag input kang two-wire RTD, kailangan lang ma short circuit deng safety barrier terminals 4 ampo 2
| Input signal type ampo range table | ||||
| Code | RTD model | Sukat ning sukad | Minimum range | Katutuan ning pamagbayu |
| 1 | G53 | -50～150°C | 20°C | 0.2°C/0.1% |
| 2 | Cu50 | -50～150°C | 20°C | 0.2°C/0.1% |
| 4 | Pt100 | -200～850°C | 20°C | 0.2°C/0.1% |
| 6 | Pt1000 | -200～850°C | 20°C | 0.2°C/0.1% |
| 7 | Ni1000 | -60～250°C | 20°C | 0.2°C/0.1% |
Alimbawa: metung a input ampo metung a output, thermal resistor Pt100 input, 4~20mA output,24V power supply, model PHG-11TZ-41
PHD-11TC-33A-23
PHG-11TZ series PHG-12TZ series