Inbiakpawhna Input a ni
- Terminal Board-ah hian a awm a
- Hriselna atana harsatna awmte
- Signal Isolators te pawh a awm
- Surge laka invenna hmanrua te
- Safety Relay te a awm bawk
- Intelligent I/O Module hrang hrang awmte
- Gateways fing tak tak te
- Industrial Data Optical Transceiver hmanga siam a ni
- Online hmanga Dew Point thlirletna
- Data lakkhawmna Modules te
- HART data converter a ni
01 a ni02 a ni03 a ni04 a ni05 a ni
PHG-11TC-33M hmanga siam a ni
A tlangpuiin
PHG-11TC-33M hi signal isolator with communication signal , chu chuan onsite leh control room-a RS-485 Half Duplex digital signal two-way communication chu a tihlawhtling thei a ni. Circuit hian on-site instruments te tan power distribution a pe a ni. Voltage value hi top dial switch hmangin a inthlak thei a ni. Operation method bik chu a hnuaia chart-ah hian tarlan a ni.
He product hian independent power supply a mamawh a, power supply, input leh output te chu isolated a ni.
| Input a ni | |
| Signal input a ni | RS-485 Half Duplex Digital Signal hmanga siam a ni |
| Distribution voltage a ni | Field instrument: 5V, 6V, 8V, 9V, 12V te tan power distribution siamsak |
| A chhuah dan: 1.1. | |
| A chhuahna signal a ni | RS-485 Half Duplex Digital Signal hmanga siam a ni |
| Transmission tihkhawtlai a ni | ≤10μs a ni |
| Transmission rate a ni | ≤1.2kbps~56kbps a ni |
| Supply voltage a awm | 20-35VDC thleng a ni |
| Power hmanralna a ni | |
| LED hmanga entir a ni | Green: Power chhinchhiahna a ni |
| Yellow: Control room hian site ah signal a thawn chhuak thin | |
| Red: site atanga control room thlenga signal thawn chhuah | |
| Switching hun dawng leh thawn chhuah | ≥20ms a ni |
| Temperature parameter hrang hrangte | Hnathawh lumna: -20°C~+60°C |
| a dahna hmun:-40°C~+80°C | |
| Relative humidity a awm lo | 10%~95% RH ah chuan condensation a awm lo |
| Insulation chakna a ni | ≥2000VAC/min(input/output/power supply inkar) a ni. |
| Insulation a do theih loh | 100MΩ(500 VDC) (input/output/power supply inkar) a ni. |
| Electromagnetic nena inmil theihna | GB/T 18268(IEC 61326-1) ah hian a awm a. |
| MTBF | 800000h a ni |
| Wire mamawh a ni | Cross section ≥ 0.5mm2 a ni a; Insulation chakna ≥ 500V a ni |
| Field hmanrua hman tur | RS-485 Half Duplex hmanga inbiakpawhna hmanrua |
Note: Power rail function hi optional function a ni a, order an siam dawnin power supply method an tarlan a ngai a ni
Power rail connector thlan dan tur chu "Annex" phek 89-ah en theih a ni.
PHD-11TC-33A-23-ah a awm bawk
PHG-11TC-33M hmanga siam a ni