Temperature input a ni

Products category hrang hrang

Thil siam chhuah langsar tak takte

PH-Co series RS422 Control Net bus data optical transceiver hmanga siam a ni

PH-Co series RS422 Control Net bus data optical hmanga siam a ni a, a man pawh a to hle.

PHM-7230 Ex Intrinsically Safe Isolated IO Modules fing tak tak te chu a awm a

PHM-7230 Ex Intrinsically Safe Isolated a ni a, a chhuahna tur hmun leh a hmanna tur hmun chu a inthlau hle.

PHM-7540 Channel pali nei analog input module a ni

PHD-11TT-*1 a ni

PHD-11TT-*1 1 input 1 chhuahna

TC input/ 4-20mA output (configur theih) a ni.

Min rawn biak theih reng e

product chungchang chipchiar takin

Technical parameter a ni

Wiring diagram hmanga siam a ni

Certification pek a ni

Internet atanga thil lachhawng

A tlangpuiin

Thermocouple input isolation safety barrier hian hmun hlauhawma thermocouple (TC) signal te chu a isolate thei a, 4-20mA current signal ah a chantir thei a, safety zone ah a output thei bawk. He safety barrier hian cold junction compensation built-in a nei a, fing takin a configure theih bawk. Thermocouple range tak tak chu computer software hmangin a set theih a ni. Wire breakage alarm leh out of range alarm tih hnathawh a nei bawk. He product hian independent power supply a mamawh a, power supply, input leh output terminal hrang hrang a awm bawk. "*" hian thermocouple input type a entir a, model bik chu code hmanga entir a ni (a chipchiar zawkna chu "Input Signal Type leh Range Table" en rawh).

Input signal chi hrang hrang leh tehna range te
Code a ni	TC model hmanga siam a ni	A tehna range	Range tlem ber a ni	Conversion dik tak a ni
1. 1. A rilru a hah lutuk chuan a rilru a buai em em a	K.K	-200~1370°C a ni	50°C a ni	0.5°C/0.1% a ni.
2. 2. A rilru a hah lutuk chuan a rilru a buai em em a	S	-50~1760°C a ni	500°C a ni	1.5°C/0.1% a ni.
3. A rilru a hah lutuk chuan a rilru a buai em em a	LEH	-140~1000°C a ni	50°C a ni	0.5°C/0.1% a ni.
4. 4. A rilru a hah lutuk chuan a rilru a buai em em a	J. A rilru a hah lutuk chuan a rilru a buai em em a	-160~1200°C a ni	50°C a ni	0.5°C/0.1% a ni.
5. A rilru a hah lutuk	B	250~1800°C a ni	500°C a ni	1.5°C/0.1% a ni.
6. 6. A rilru a hah lutuk chuan a rilru a buai em em a	T. A rilru a buai em em a	-200~400°C a ni	50°C a ni	0.5°C/0.1% a ni.
7. A rilru a hah lutuk	R. A rilru a hah lutuk	-50~1760°C a ni	500°C a ni	1.5°C/0.1% a ni.
8. A rilru a hah lutuk chuan a rilru a buai em em a	N	-200~1300°C a ni	50°C a ni	0.5°C/0.1% a ni.

Entirnan: input chu K-couple nen a nih chuan temperature range chu 0~1200°C a ni a, with

pakhat output 4~20mA, power supply 20~35VDC, chutah chuan model chu a ni tur a ni

PHD-11TT-11 (0~1200°C) a ni.

Computer hmangin measuring range chu 0~1200°C range tarlan angin a set theih a ni

A chiang zawk

Hriselna hmuna input

Signal input a ni

K, S, E, J, B, T, R, N thermocouple signal te (a chipchiar zawkna chu "Input Signal Type leh Range Table" en rawh)

Input tihtawp a ni

Default "low alarm" chu configuration software hmangin "high alarm" ah siam danglam theih a ni

Signal awmna hmun a ni

A inmil thermocouple tehna range chu -10~100mV a ni.

A tehna range

User te chuan order an tih hian anmahni configuration an siam a, tail number emaw a dang emaw ah an tarlang thin.

Cold junction compensation a awm bawk

±1°C(Compensation range -20°C~ +60°C) a ni ang.

Safety lam atanga chhuak:

A chhuahna signal a ni

4~20mA a ni

Output load theihna a nei

0~500Ω(a duh angin a siam theih)
Voltage output chi duhthusam, load resistance RL ≥ 330kΩ

Power supply a ni

20-35VDC thleng a ni

Power hmanralna a ni

24VDC power supply a ni a, 20mA a pe chhuak bawk
≤40mA(PHD-11TT-*1) a ni.
≤70mA(PHD-12TT-*11) a ni a, a man pawh a tlawm hle.

LED hmanga entir a ni

Green: Power chhinchhiahna a ni
Low range alarm L1 light a eng a, high range alarm L2 light a eng bawk

Output dik tak a ni

A chipchiar zawkna chu "Input Signal Type leh Range Table" ah hian en la

Chhanna hun pek hun

500ms chhunga final value 90% thleng

Temperature a inthlak danglam thin

0.005%FS/°C a ni

Temperature parameter hrang hrangte

Hnathawh lumna: -20°C~+60°C, dahna hmun:-40°C~+80°C

Relative humidity a awm lo

10%~95% RH ah chuan condensation a awm lo

Dielectric chakna a ni

Intrinsically safe side leh non-intrinsically safe side inkar (≥ 3000VAC/min);
power supply leh non-intrinsically safe terminal (≥ 1500VAC/min) inkar a ni.

Insulation a do theih loh

≥100MΩ (input/output/power supply inkar) a ni.

Electromagnetic nena inmil theihna

IEC 61326-1(GB/T 18268) ang chuan, IEC 61326-3-1

MTBF

100000h a ni

Wire mamawh a ni

Cross section ≥ 0.5mm2 a ni a; Insulation chakna ≥ 500V a ni

Field hmanrua hman tur

K. S, E, J, B, T, R, N TC sensor hmanga siam a ni

Installation hmun a ni

Safe zone-a dah a nih chuan Zone 0, IIC, Zone 20, leh IIIC thlenga hmun hlauhawma intrinsic safety instrument-te nen a inzawm thei a ni