- Terminal Board
- Jam gwoko kwo ma juketho kende
- Jam poko lanyuth
- Jam tic mi gwoko kwo pa dhanu
- Relays mi gwoko kwo
- I/O Modules ma rieko ma jupoko
- Dhugola ma rieko
- Jam tic ma tiyo ku mac
- Dew Point Analyzers mi intanet
- Module mi nwangu lembe
- HART data converter
PHG-12TF-277+
Neno wi lembe
Surge protection switch input relay output signal isolator loko input signal pa switch contact nyo proximity switch ni relay output nikadhu kud i isolation.
Nwangu peko mi line juwodho kud i relay matung tung man ju nyuthu ku ler mi LED iwi module. Switch pa module jutiyo kudu pi yero phase pa channel man ka nyo tic mi nwangu peko mi line mitere.
Piny eni mitu ebed ku kero pare gire, man kero, kabedo mi donyo man mi wodhu kud i iye jupoko.
Lembe ma pire tek
| Keth | |
| Lanyuth mi ketho | Lok dhanu/jami ma kago |
| Teko pa mac pa sensor | Ikum 8V |
| Kite mi loko | |
| Kite mi ketho/woko: | |
| I kabedo mi ketho lembe kawoni | >2.1mA, adwogi ne cego, nyutho ON; Ka |
| Wodhu maber "Yabe"/"Cung" | Ka dial switch K1、K3 utiye "ON" thenge, relay output utiye "Normally closed". |
| Wec ku jang tic mi loko lembe | Ka dial switch K1、K3 utiye i thenge mi "OFF", relay output utiye "Normally opened". Ka dial switch K2、K4 utiye i thenge mi "ON", circuit yero ma nyutho tic pa alarm pa LFD. |
| Adwogi | |
| Lanyuth mawok | Relay |
| Kero mi ringo | 250VAC/2A,30VDC/2A ka juketho i tic ku pek ma tek |
| Saa mi dwoko wang lembe | 20ms |
| Jam tic mi gwoko kum: | |
| Nominal discharge current ln(8/20μs) | 5kA |
| Voltage protection level Up(8/20μs): | 60V(lain ku lain) |
| Voltage protection level Up(8/20μs): | 600V(line to ground) |
| Nimakere ku cik | GB/T18802.21-2016(equivalent to 1EC61643-21:2012) |
| Piny ma pire tek | |
| Voltage mi mio | 20~35VDC |
| Tiyu ku mac | |
| LED ma nyutho | Green: Janyuth pa kero Yellow: Output relay i tic maber Makwar: LFD nyutho, lanyuth pa peko |
| Piny ma mako lyethu | Liet pa tic: -20°C ~ +60°C, Piny ma jugwoko: -40°C ~ +80°C |
| Piny ma ngic | 10%~95% RH epe ku pii |
| Teko mi gwoko piny | ≥2000VAC/min (kind piny ma wok/wok woko/mio teko) |
| Teko pa lyethu | 100MΩ(500V DC) (i kind piny ma wok/wok woko/mio teko) |
| Ber pa mac | GB/T 18268 (IEC 61326-1) |
| MTBF | 80000h |
| Piny ma mitere pi waya | Thenge ma lageng ≥ 0.5mm2; Teko pa lyethu ≥ 500V |
| Jam tic mi poto ma tiyo | Jam tic mi tic macalo dry contacts nyoke NAMUR type proximity switch inputs ma lubo cik pa DIN19234 |
Dit
Waya mi mako
Kano:
1. Kethu kero pa gari mi kero ubedo tic ma jutimo. Jutic umitu gi nyuth kit ma kero migi tiye kudu ka gibe lwongo. Kwayu nen piny ma ju medo i pot karatasi mir 89.
Nwangu peko mi lain
Jutic copo yero "ON" thenge pa switch ma malu pa module ni ketho tic mi nwangu peko man ni nyuthu alarm nikadhu kud i ler makwar pa LED. I kabedo ma juketho i iye current>7mA, alarm mi circuit ma nok (SC); I kabedo ma juketho i iye current