Analog Input Output Nsakraeɛ Board PHFD-8AIO

Ntrɛwmu dodow: 8

Signal type: Dual line analog (ɔhyew, voltage / mprempren) input / analog output, abiɛsa terminal isolation

Aboa akwanside a wɔatew wɔn ho: Pinghe series biako kwan analog ahobammɔ akwanside, P + F、 . Ɔkwankyerɛ keteke kwan grid a ɛyɛ tratraa na wɔayɛ no sɛnea ɛte (13mm), sɛ wɔde Pinghe ahyɛ mu a, ɛsɛ sɛ wɔtrɛw akwankyerɛ keteke no mu.

Loop mprempren: LED mprempren kyerɛ intanɛt so sɔhwɛ tokuru

Installation kratasin: M4.8 ankasa tapping anaa M4 skru fixation

Kaad no afã horow a ɛboa:

S7-300PLC: Ɔde ne nsa kyerɛɛ ne so. 6ES7 331-1KF02\7KF02\7NF00\7NF10, .332-5HF00/650-8AK60/650-8BK60 na ɛwɔ hɔ

Saa adeɛ yi ntumi mmoa 7KF02 loop power supply mode (range card D) no.

Nsiesiei ahorow a wɔtaa yɛ:

Single channel analog input/output a wɔayiyi afi nnipa mu pon:

Flat ne ɔkwan biako analog input / output keteke grid (12.8mm) .

Tumi a wɔde ma ne DB port ahoɔden nhyehyɛe:

Wɔayɛ saa ade yi ama redundant power supply na ɛba ne power loss alarm output

DB1 port no kura 2-core power cord a wɔde ma ahoɔden ma PLC module no.

Wɔnam short-circuit caps a anyinam ahoɔden a ɛba no de asi hɔ so na ɛhwɛ saa tumi a wɔde ma yi so, a short-circuit cap biara ne waya bi hyia, na ɛsɛ sɛ wɔde si hɔ sɛnea ɛho hia ansa na wɔde anyinam ahoɔden akɔ.

Nkyerɛkyerɛmu Titiriw:

1. Hann a ɛwɔ ɔmansin LED no betumi akyerɛ bɛyɛ sɛ ɔmansin no mu mprempren kɛse;

2. Sɛ wode multimeter di dwuma de twitwa mprempren kwan a ɛwɔ saa ɔmansin sɔhwɛ tokuru yi mu no tiaa a, ebetumi asusuw anyinam ahoɔden a ɛwɔ mu no pɛpɛɛpɛ a ennya ɔmansin no dwumadi so nkɛntɛnso;

Sɛ circuit LED no di huammɔ na ebue a, wobetumi de LED a ɛho nhia ahyɛ sɔhwɛ tokuru no mu de asiesie;

Parameter a wɔde kyerɛ

Order model	PPHD-8AIO na ɛyɛ adwuma
kyerɛ mu	Analog input-output isolation nsakrae board
Mfiridwuma mu nsusuwii ahorow
Channel	nwɔtwe
Akwanside ahorow a ɛma obi tew ne ho dodow	8 akwan biako so
Mfinimfini ahoɔden a ɛma ahoɔden	22-30VDC ahoɔden a ɛho nhia a wɔde ma
Tumi a ɛyera alarm output	mpɛn pii no wɔto mu
Mfinimfini amansin mprempren nkyerɛkyerɛmu	LED hann, non rewiring sɔhwɛ tokuru
Maximum current of on-site afã kwan no	25mA na ɛyɛ adwuma
Nkitahodi a ɛwɔ mu no su	D-SUB25PF + HART na ɛwɔ hɔ
Wɔ site afã nkitahodi type	bot
Terminal crimping ho nkyerɛkyerɛmu	0.3 ~ 2.5 (mm2) na ɛwɔ hɔ.
sɛnkyerɛnne kwan so su	2-wire transmitter, anan waya nhyehyɛe sɛnkyerɛnne, ɔhyew sɛnkyerɛnne, mprempren output
Isolator output sɛnkyerɛnne	4-20mA na ɛwɔ hɔ
adwumayɛ mu hyew	-30 ̊C ~ + 55 ̊C na ɛwɔ hɔ
ɔhyew a wɔde sie	-40 ̊C~+70 ̊C na ɛwɔ hɔ
Nsusuwii (tenten x ne tɛtrɛtɛ x ne sorokɔ) .	136x112 * 60mm na ɛwɔ hɔ
Installation kɛse	M4.8 ankasa tapping anaa M4 skru 127mm
nkekaho
Tumi ho insurance	Fang Insurance 2A
Cable a ɛne ne ho hyia
Order model	FL-20D-22A20-YZ-Xm na ɛwɔ hɔ
Hyɛ no nsow: Y-PLC afã interface model Z-card ne sɛnkyerɛnne type X-tenten