- Terminal Board no yɛ adwuma
- Ahobammɔ Akwanside ahorow a Atew ne Ho
- Nneɛma a Wɔde Tew Nsɛnkyerɛnne Ho
- Mfiri a Ɛbɔ Surge Ho Ban
- Ahobammɔ Relays
- I/O Modules a Ɛyɛ Nyansafo a Wɔatew Wɔn Ho
- Apon a Ɛyɛ Nyansa
- Nnwumayɛbea Data Optical Transceivers
- Intanɛt so Dew Point Analyzers
- Data a Wɔde Nya Nneɛma
- HART data a wɔde dannan nneɛma
Isolator Nsakraeɛ motherboard PHFD-16AIO-D
Ntrɛwmu dodow: akwan 16 (nkwan abien) .
Signal type: Dual line analog (ɔhyew, voltage / mprempren) input / analog output, abiɛsa terminal isolation
Boa akwanside a wɔatew wɔn ho: MTL5500 series dual channel analog ahobammɔ akwanside, P + F、 . Pinhe simulation akwankyerɛ keteke kwan so grid (12.8/16/18mm) .
Loop mprempren: LED mprempren kyerɛ intanɛt so sɔhwɛ tokuru
Installation kratasin: M4.8 ankasa tapping anaa M4 skru fixation
Kaad no afã horow a ɛboa:
S7-300PLC: 6ES7 331-1KF02 \ 7KF02 7NF00 7NF10332-5HF00 650-8AK70, ne nea ɛkeka ho.
Saa adeɛ yi ntumi mmoa 7KF02 loop power supply mode (range card D) no.
Ntrɛwmu dodow: akwan 16 (nkwan abien) .
Signal type: Dual line analog (ɔhyew, voltage / mprempren) input / analog output, abiɛsa terminal isolation
Akwanside a ɛboa ma wɔtew wɔn ho fi afoforo ho: Pinghe simulation akwankyerɛ keteke kwan so grid (12.8/16/18mm) .
Loop mprempren: LED mprempren kyerɛ intanɛt so sɔhwɛ tokuru
Installation kratasin: M4.8 ankasa tapping anaa M4 skru fixation
Kaad no afã horow a ɛboa:
S7-300PLC: 6ES7 331-1KF02 \ 7KF02 7NF00 7NF10332-5HF00 650-8AK70, ne nea ɛkeka ho.
Saa adeɛ yi ntumi mmoa 7KF02 loop power supply mode (range card D) no.
Tumi a wɔde ma ne DB port ahoɔden nhyehyɛe:
Wɔayɛ saa ade yi ama redundant power supply na ɛba ne power loss alarm output
DB1 port no kura 4-core power cord a wɔde ma ahoɔden ma PLC module no. Wɔnam short-circuit caps a power output no de asi hɔ so na ɛhwɛ saa tumi a wɔde ma yi so, a short-circuit cap biara ne waya bi hyia, sɛnea wɔakyerɛ wɔ atifi nifa so mfonini no mu no. Ansa na wɔde anyinam ahoɔden bɛmena no, ɛsɛ sɛ wɔyɛ nhyehyɛe sɛnea ɛho hia.
Hyɛ no nsow titiriw:
1. Hann a ɛwɔ ɔmansin LED no betumi akyerɛ bɛyɛ sɛ ɔmansin no mu mprempren kɛse;
2. Sɛ wode multimeter di dwuma de twitwa mprempren kwan a ɛwɔ saa ɔmansin sɔhwɛ tokuru yi mu no tiaa a, ebetumi asusuw anyinam ahoɔden a ɛwɔ mu no pɛpɛɛpɛ a ennya ɔmansin no dwumadi so nkɛntɛnso;
Sɛ circuit LED no di huammɔ na ebue a, wobetumi de LED a ɛho nhia ahyɛ sɔhwɛ tokuru no mu de asiesie;
Parameter a wɔde kyerɛ
Order model | PPHD-16AIO-D na ɛyɛ adwuma |
kyerɛ mu | Analog input-output isolation nsakrae board |
Mfiridwuma mu nsusuwii ahorow | |
Channel | dunsia |
Akwanside ahorow a ɛma obi tew ne ho dodow | 8 akwan abien |
Mfinimfini ahoɔden a ɛma ahoɔden | 22-30VDC ahoɔden a ɛho nhia a wɔde ma |
Tumi a ɛyera alarm output | mpɛn pii no wɔto mu |
Mfinimfini amansin mprempren nkyerɛkyerɛmu | LED hann, non rewiring sɔhwɛ tokuru |
Maximum current of on-site afã kwan no | 25mA na ɛyɛ adwuma |
Nkitahodi a ɛwɔ mu no su | D-SUB37PF + HART na ɛwɔ hɔ |
Wɔ site afã nkitahodi type | bot |
Terminal crimping ho nkyerɛkyerɛmu | 0.3 ~ 2.5 (mm2) na ɛwɔ hɔ. |
sɛnkyerɛnne kwan so su | 2-wire transmitter, anan waya nhyehyɛe sɛnkyerɛnne, ɔhyew sɛnkyerɛnne, mprempren output |
Isolator output sɛnkyerɛnne | 4-20mA na ɛwɔ hɔ |
adwumayɛ mu hyew | -30̊C~+55 na ɛwɔ hɔ̊C. |
ɔhyew a wɔde sie | -40̊C~+70 na ɛwɔ hɔ̊C. |
Nsusuwii (tenten x ne tɛtrɛtɛ x ne sorokɔ) . | 168X112 * 60mm na ɛwɔ hɔ |
Installation kɛse | M4.8 ankasa tapping anaa M4 skru 159mm |
nkekaho | |
Tumi ho insurance | Fang Insurance 2A |
Cable a ɛne ne ho hyia | |
Order model | FL-37D-23A40-YZ-Xm na ɛwɔ hɔ |
Hyɛ no nsow: Y-PLC afã interface model Z-card ne sɛnkyerɛnne type X-tenten | |