- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
01
PH-Co series RS422 Control Net bus data optical transceiver
Product Advantages
* Support ControlNet industrial control fieldbus
* The longest communication distance of optical fiber can reach 60KM
* The electric interface has the isolation functions with 1500V voltage and 600W surge protection
* It adopts standard industrial 35mm DIN rail installation method
* Communication rate 5Mbps
* The interface uses standard BNC interface, which is compatible with Control Net data connectors, convenient for field wiring
* It adopts DC9-30V wide power input, dual power redundancy, DC1000V power isolation and reverse connection protection, which meets the requirements of various industrial sites requirements. It can provide relay output optical fiber and power failure alarm
Electrical interface
◐ Support ControlNet protocol
◐ Compatible with ControlNet data interface with standard BNC connector
◐ Communication rate 5Mbps
◐ Isolation voltage: with 1500V isolation voltage and 600W surge protection function
product display
Optical fiber interface
✦ Fiber wavelength: multi mode: 850nm, 1310nm;Single mode: 1310nm, 1550nm
✦ optical fiber interface type: SC, ST and FC are optional;standard: SC interface
✦ Transmission optical fiber: multi mode: 50/125,62.5/125, 100/140um single mode: 8.3/125, 9/125um,10/125um
✦ Transmission distance: multi mode 2KM; single mode: 20KM
Other indicators
✹ Power supply: support dual power redundant input,DC9-30V, typical DC24V, power consumption less than1.5W
✹ Dimensions: 136mm×105mm×52mm
✹ Relative humidity: ≤90% (no condensation); storage temperature: -40~80℃
✹ Optical fiber link failure and power failure alarm relay output; contact maximum capacity: DC48V/1A, industrial terminal interface
✹ Working temperature: -10-70℃(-40~+85℃ optional)